This issue may be caused by a WiFi module failure in the screen assembly. Step 1: Check whether the WiFi list can be loaded Please open the WiFi settings page and check whether t...
"The rollers are primarily responsible for controlling the forward and backward movement of the material. Please note: Pay close attention to the position of the black pads on the...
Please open the machine’s WiFi list and check whether available WiFi networks can be detected normally. If the machine cannot detect or display WiFi networks, the machine’s networ...
Yes. If the phone is correctly positioned in the fixture but the fixture does not respond when you tap “Clamp”, the fixture may be faulty and needs to be replaced. Ple...
Please first confirm the specific issue you are facing: 1. If the blade holder does not go down during cutting This is usually caused by a mainboard malfunction. In this case, t...
