Mietubl
Mietubl Cutting Machine Knowledge Base

The machine displays a "Timeout" error on startup and the "Reconnect" button is unresponsive. What's the problem

Last updated Nov 22, 2025
M
Mietubl Team
troubleshooting hardware failure timeout error reconnect button screen connection mainboard failure firmware issue cable issue system upgrade screen replacement
If the machine displays a ""Timeout"" error on startup and the ""Reconnect"" button is unresponsive, it usually means the screen cannot properly connect to the mainboard. Possible causes include:
Screen firmware loss

Loose or broken cable connection between the screen and the mainboard

Mainboard failure

You can try the following steps to resolve the issue:

Press and hold the Reconnection button → Tap System Upgrade → Enter the password 1313 → Perform the upgrade to check if the system firmware can be reinstalled.



If replacing the screen doesn't fix the problem, then the device's motherboard may be faulty.
Try replacing the screen to see if the issue is resolved.

Was this article helpful?

Your feedback helps us improve the knowledge base.

Previous
My machine is not loading anything, even with the internet working
 Next
How can I connect screen protector machine with laptop