If the machine is operating slowly, it is usually because the cutting speed is set too low. You can adjust the setting by following these steps: Open the Settings page; Find the...
We not only provide the screen protector cutting machines, but also offer various types of cutting materials with different functions and sizes. You can purchase the cutting films...
You can access your machine’s cutting activity from the Cutting Records section on the home page. There, you will find the daily and 30-day cutting statistics. If you req...
If you need to recharge (add cutting balance or renew your service) for the machine, please contact the local distributor who sold the device to you. Your distributor will...
This issue usually occurs for the following reasons: Your email contains special characters Some characters such as **& , / , *** are not supported by the registration system...
According to your description, this issue is usually caused by a short circuit on the motherboard or a motherboard failure. When the motherboard fails to complete the self-test, th...
The screen protector machine’s app updates are one-way. This means: ➡️ Once the app is updated to a higher version, it cannot be rolled back to a lower version. Rollback o...
If you need to fill or recharge consumables (such as credits,cutting materials, blades, etc.), please contact your local distributor or the person who originally sold the machine...
If the main holder (blade carriage holder) becomes loose and you need to press it by hand for proper cutting, this means the part is worn out or has lost stability. The cutting ho...
If the blade does not drop properly during cutting, this issue is most likely caused by a mainboard malfunction. The blade-down action is controlled by the Y-axis motor signal fro...
If your touch screen is not responding properly, please check the following: 1. Confirm you are using the original power adapter The original adapter should be 24V / 2.7A. Usi...
