If you want to create a new custom template, you can use the machine’s built-in Custom Template function. This feature allows you to manually enter: Width Height Corner...
MTB-CUT 180T Screen Protector Cutting Machine does not include UV curing function. If you need to perform UV curing operations, you will need to use a separate UV curing device, s...
Phone case stickers are usually smaller than standard back film sizes. To avoid user confusion, this size is currently not supported by the machine.
If you are using standard back film, please follow these steps: Set the material size in settings according to your actual material (e.g., 180 × 120 mm) Enable the &ldquo...
"If the MTB-CUT M288 intelligent film cutting and pasting machine displays a ""Reconnection"" message at startup or if the cutting Car fails to cut properly, the mainboard may be f...
"In the MTB-CUT M188 screen protector cutting machine, the rubber strip at the bottom of the cutting module is designed to protect the cutting blade and extend the lifespan of both...
"If the MTB-CUT M288 intelligent film cutting and pasting machine displays a ""Reconnection"" message at startup or if the cutting Car fails to cut properly, the mainboard may be f...
Yes. The MTB-CUT 180T Screen Protector Machine can cut various types of screen protector materials. The maximum supported cutting thickness is 0.7 mm, which fully covers a...
Yes, the machine supports simple modifications to existing templates, such as expanding or reducing the size or opening holes.
In most cases, you can keep the cutting speed at the default value of 200. This setting works well for the majority of materials. When to reduce the speed You should lower the...
"We offer multiple template variations for the same phone model to meet different user requirements. You can distinguish them by their names, which indicate their intended usage sc...
The correct material (paper) size setting is: 180 mm × 120 mm Please make sure the material is placed in the correct direction before cutting.
"Here are some default setting ：material size is 180mm width × 120mm height. Cutting pressure: 300 Cutting speed: 200 Blade holder scale: 5 These default settings are sui...
Center Cutting is a function that positions the cutting area exactly in the center of the material. The cutting position is calculated based on the width and height values you ent...
The Blade Holder Scale depends on the thickness of the material. For most TPU screen protector materials, the following settings are recommended: Blade Size: 5 Pressure: 300 &n...
The Blade Holder Scale depends on the thickness of the material. For most Back Film materials, the recommended settings are: Blade Size: 4 Pressure: 300 These settings...
The cutting speed does not have a major impact on most cutting tasks. In general: 👉 200 is the recommended default cutting speed. You only need to reduce the cutting speed when...
"We provide a local data editing feature to help customers meet specific size requirements. You can modify existing templates on the machine — including scaling up or down — based...
If the machine is operating slowly, it is usually because the cutting speed is set too low. You can adjust the setting by following these steps: Open the Settings page; Find the...
Large-size screen protectors such as iPad and laptop films have longer cutting paths. During long-distance cutting, the material may slightly shift due to the blade pressure, whic...
