Showing 368 results
for
"machine not cutting"
MTB-CUT M188
"If the MTB-CUT M288 intelligent film cutting and pasting machine displays a ""Reconnection"" message at startup or if the cutting Car fails to cut properly, the mainboard may be f...
MTB-CUT 180T
If the machine is operating slowly, it is usually because the cutting speed is set too low.
You can adjust the setting by following these steps:
Open the Settings page;
Find the...
MTB-CUT 180T
In most cases, you can keep the cutting speed at the default value of 200.
This setting works well for the majority of materials.
When to reduce the speed
You should lower the...
MTB-CUT 180T
"The recommended cutting parameters for back films are:
Material Size: 180mm width × 120mm height
Pressure: 300
Blade Holder Scale: 5
Speed: 200
These settings are suit...
MTB-CUT 180T
"The default parameters of the screen protector cutting machine — blade holder scale 5 and cutting pressure 300g — are suitable for most materials, including HD clear film.
If the...
MTB-CUT 180T
The smart cutting machine supports Canon series printers, and we recommend using the Canon G580 / G680 models or any Canon printer that uses the same driver.
Note: Since cutting m...
MTB-CUT M188
"The roller in the MTB-CUT M188 screen protector cutting machine is primarily responsible for controlling the forward and backward movement of the cutting material.
If the cutting...
MTB-CUT M188
This video provides a guide on how to replace the cutting module of the MTB-CUT M188 screen protector cutting machine. https://mietublcom.oss-accelerate.aliyuncs.com/service/videos...
MTB-CUT 180T
The MTB-CUT 180T screen protector cutting machine supports a maximum cutting width of 228 mm,
which corresponds to screen protectors up to approximately 16 inches in size.
Notes:...
MTB-CUT 180T
You can access your machine’s cutting activity from the Cutting Records section on the home page.
There, you will find the daily and 30-day cutting statistics.
If you req...
MTB-CUT 180T
This issue usually occurs when cutting full back film templates while the “Cut Center” option is enabled.
Solution
When cutting full back films, please disable the &l...
MTB-CUT 180T Pro
The MTB-CUT 180TPro screen protector cutting machine supports:
Canon printers
Epson printers
When connecting the printer, please make sure:
The printer and the screen prote...
MTB-CUT 180T
All of our screen protector cutting machines (Including: 180T / M188 / M288 ) support the counting and statistics function.
You can check the cutting and sales statistics by going...
MTB-CUT 180T
Under normal conditions, we recommend replacing the blade after approximately: 300 cuts
However, this is only a recommended value.
The actual blade lifespan may increase or decre...
MTB-CUT 180T
"Our smart screen protector machine supports a cutting speed range of 0 ~ 500.
Recommended Default Speed: 200 (suitable for most materials and mobile phone screen protectors)
Lo...
MTB-CUT 180T
If the film is being cut crookedly or the cutting position is inaccurate, further inspection is required.
Please click the WhatsApp button below and send our technical support tea...
MTB-CUT 180T
The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material.
The thicker the material, the higher the blade holder scale...
MTB-CUT M688/M288
The screen protector machine will automatically find the middle cutting position according to the material size setting. Adjust the material size setting to change the cutting rang...
MTB-CUT M188
The screen protector machine will automatically find the middle cutting position according to the material size setting. If you need to change the cutting range, adjust the materia...
MTB-CUT 180T
Our screen protector cutting machine provides five built-in pressure preset slots.
You can rename these presets and save the pressure settings for your commonly used cutting mater...
Showing 181
to 200
of 368 results
