Please keep speed at 200. The blade holder scale should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade s...
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
Installing a UV screen protector is different from applying regular screen protector materials. UV protectors require an additional curing step to harden the surface. Steps &...
"The material size setting depends on the type of material you are using. Mietubl's standard material size is 180mm (width) x 120mm (height). You can configure your machine accord...
To add a new model, send the full and accurate brand and model name (e.g., "Reeder S23 Pro Max," "Xiaomi Pad SE") in the support chat. If possible, include a clear picture of the d...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size mainl...
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
If you want to improve cutting results, please follow these tips: Check Wheel Position Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
"To create a custom rear film, you need to connect your screen protector cutting machine to a printer. Steps: Connect the Devices It’s recommended to use Epson or Canon printer...
Phone case stickers are usually smaller than standard back film sizes. To avoid user confusion, this size is currently not supported by the machine.
The correct cutting parameters depend on the materials being used. Here are some recommended settings for common materials: Material | Back Film | Four Layer Soft Film | Explosion-...
"Here are some default setting ：material size is 180mm width × 120mm height. Cutting pressure: 300 Cutting speed: 200 Blade holder scale: 5 These default settings are sui...
The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material. The thicker the material, the higher the blade holder scale...
How to connect the screen protector machine to a Canon / Epson printer? Please follow these steps: Go to: “Mine” → “APP version update” → &ldquo...
The operation method for the MTB-CUT 180T Pro is the same as the MTB-CUT 180T. The main differences between the two models are: Maximum cutting size Additional functions and f...
Please cut within the disabled the "cut center" option, and then try cutting again.
"The rubber cutting mat strip located beneath the blade serves to prevent blade wear and extend the blade’s service life. However, after prolonged use, the surface of the mat strip...
What’s the difference between templates named “Case Friendly” and “Front”? Templates labeled “Case Friendly” are specially designed to be...
