If you are using standard back film, please follow these steps: Set the material size in settings according to your actual material (e.g., 180 × 120 mm) Enable the &ldquo...
"The timing of version updates depends on the release of new features and does not follow a fixed schedule. You can go to ""My"" → ""APP Version Update"" to check whether your curr...
If the screen fails to load properly, it may be caused by: An abnormal power shutdown that damaged the system settings Incorrect language configuration after an update Corrupted...
If you are using a printer brand other than Canon or Epson (such as an HP printer without Wi-Fi), you will need to install the PrinterServer software on a computer. Steps 1.Downl...
Sorry, currently there is no mobile app available for the Mietubl MTB-CUT 180T screen protector cutting machine. The device is mainly operated through its built-in system and clou...
"This issue may be caused by the app freezing due to cache. You can try the following steps to fix it: Follow the method shown in the video below to clear the cache. https://o...
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
If you are using a printer brand other than Canon or Epson (such as an HP printer without Wi-Fi), you will need to install the PrinterServer software on a computer. Steps 1.Downl...
"If the cutting machine stops halfway, it is usually due to incorrect material size or parameter settings. When the cutting carriage reaches the edge, it triggers the edge sensor,...
Sorry, this model does not support a mobile APP. The machine is operated directly through its built-in system and touchscreen interface.
"Cutting misalignment is usually caused by: Center Cutting Not Enabled: Make sure the “Center Cutting” option is enabled on the cutting page so the machine automatically positions...
Please keep speed at 200. The blade holder scale should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade s...
The Upgrade Code is mainly used for internal testing purposes. Usually are unstable version Under normal circumstances, if you want to update your device, you only need to: C...
The correct Gear Ratio settings are: X-axis: 2000 Y-axis: 2000 Please do NOT modify the Gear Ratio settings. Incorrect Gear Ratio values may cause the machine to malfun...
The Blade Holder Scale depends on the thickness of the material. For most TPU screen protector materials, the following settings are recommended: Blade Size: 5 Pressure: 300 &n...
The Blade Holder Scale depends on the thickness of the material. For most Back Film materials, the recommended settings are: Blade Size: 4 Pressure: 300 These settings...
Please click "My" → "Version Update" → "Update". If a new app version is available, your device will update automatically. If no update is available, then you are already...
"The machine’s software version depends on the release of new features. As of October 2025, the latest APP version is 3.0.05. Tips: You can check or update your version by foll...
The clarity of the printed photo mainly depends on: The resolution and quality of the original image The printer and its print quality/settings The screen protector cutting...
The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material. The thicker the material, the higher the blade holder scale...
