Showing 193 results
for
"mietubl"
MTB-CUT 180T
"
Sorry, the current Mietubl screen protector cutting machine does not support direct connection to a mobile app.
All operations — including model selection, data updates, and de...
MTB-CUT 180T
Please follow the blade replacement instructions to correctly insert or replace the blade in the Blade Holder.
If you are unable to press the Blade Holder, the blade may be stuck...
MTB-CUT 180T
There are a certain list of the printer models that are supported, and Canon G580, G680 is mainly recommended.
Recommended
Canon G580、G680
Canon MB series
MB5400 、M...
MTB-CUT 180T
Sorry, the current Mietubl screen protector cutting machine does not support direct connection to a mobile app.
All operations — including model selection, data updates, and...
MTB-CUT 180T
"By default, the Mietubl screen protector cutting machine does not support direct PC connection.
The machine runs on an independent embedded operating system, and all templates and...
MTB-CUT 180T
"By default, the Mietubl screen protector cutting machine does not support direct PC or laptop connection.
The machine runs on an independent embedded operating system, and all tem...
MTB-CUT 180T
"Currently, the MTB-CUT 180T screen protector cutting machine does not include a mobile app.
All operations — such as template selection, cutting setup, and data updates — are perf...
MTB-CUT 180T
Cutting directly from an external vector editing software is not a standard feature of the Mietubl MTB-CUT 180T scren protector machine series.
Standard machines do not support co...
MTB-CUT 180T
The Mietubl MTB-CUT 180T Series screen protector cutting machines do not support mobile app connectivity.
Mobile app connectivity is available on the MTB-CUT 180T Pro Series.
&nb...
MTB-CUT 180T
You can restore the app to its original working state by performing a factory reset, which can resolve most software-related issues.。
This video provides a step-by-step guide on...
MTB-CUT 180T
If the blade does not drop properly during cutting, this issue is most likely caused by a mainboard malfunction.
The blade-down action is controlled by the Y-axis motor signal fro...
MTB-CUT 180T
This issue is usually caused by a mismatch between the material size settings and the template being used.
When cutting full back film, the cutting area is larger than standard te...
MTB-CUT 180T
Please follow the operation video to connect and set up the printer.
Important Notes
Make sure the printer and MTB-CUT 180T are connected to the same WiFi network.
Not all pri...
MTB-CUT 180T
This video demonstrates how to restore the machine to its factory settings.
Performing a factory reset will return the device to its original working state.
Please note: Any app...
MTB-CUT 180T
"Resetting the device can resolve most software-related issues.You can access the reset option through the Wi-Fi list on the device.Please note: Due to differences between device v...
MTB-CUT 180T
Please cut within the disabled the "cut center" option, and then try cutting again.
MTB-CUT 180T
If no models are displayed after updating the machine and you only see “K_product”, this is usually because the APP data loading process was interrupted after the upgra...
MTB-CUT 180T
Please open the machine’s WiFi list and check whether available WiFi networks can be detected normally.
If the machine cannot detect or display WiFi networks, the machine’s networ...
MTB-CUT 180T
If you want to create a new custom template, you can use the machine’s built-in Custom Template function.
This feature allows you to manually enter:
Width
Height
Corner...
MTB-CUT 180T
It is usually because the APP data loading process was interrupted after an upgrade, resulting in incomplete data.
Please restore the machine to factory settings, and then upgrade...
Showing 141
to 160
of 193 results
