Showing 85 results
for
"blank printing material"
MTB-CUT 180T
"To create a custom rear film, you need to connect your screen protector cutting machine to a printer.
Steps:
Connect the Devices
It’s recommended to use Epson or Canon printer...
MTB-CUT 180T
If the screen protector cutting machine cannot load phone models and the cutting page appears blank, it is usually caused by a language setting issue or corrupted software data.
S...
MTB-CUT 180T
"PrinterServer is mainly used to connect the smart screen protector cutting machine with a printer to enable personalized pattern printing and customization.
You can follow the ste...
MTB-CUT 180T
If you are using standard back film, please follow these steps:
Set the material size in settings according to your actual material (e.g., 180 × 120 mm)
Enable the &ldquo...
MTB-CUT 180T
If you are using standard back film, please follow these steps:
Set the material size in settings according to your actual material (e.g., 180 × 120 mm)
Enable the &ldquo...
MTB-CUT 180T
The Mietubl screen protector cutting machine supports both Canon and Epson printers.
Among these, Canon G580 / G680 are highly recommended for best compatibility and print quality...
MTB-CUT 180T
If the screen protector cutting machine fails to load phone models correctly, it may be caused by incorrect language settings or app data issues.
Please follow the instruction vid...
MTB-CUT 180T
If the screen protector cutting machine fails to load phone models correctly, it may be caused by incorrect language settings or app data issues.
Please follow the instruction vid...
MTB-CUT 180T
If the screen protector cutting machine cannot load phone models and the cutting page appears blank, it is usually caused by a language setting issue or corrupted software data.
S...
MTB-CUT 180T
The smart cutting machine supports Canon series printers, and we recommend using the Canon G580 / G680 models or any Canon printer that uses the same driver.
Note: Since cutting m...
MTB-CUT 180T
How do I put my picture in it and stick it on my phone?
Yes. To create a custom rear film, you need to connect your screen protector cutting machine to a printer.
1. Connect the...
MTB-CUT 180T
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material.
The thicker the material, the higher the blade holder scale...
MTB-CUT 180T
"The intelligent film cutting machine is easy to set up.
The standard settings include cutting pressure, cutting speed, blade holder scale, and material size.
Material size mainl...
MTB-CUT M188
"There are various material sizes available on the market. In the M188 screen protector cutting machine, you can set custom material sizes to ensure that the cutting range is accur...
MTB-CUT 180T
You can adjust the cutting location by modifying the Material Size and enabling or disabling the Cut Center function.
Here’s how it works:
When “Cut Center” is...
MTB-CUT 180T
"The intelligent film cutting machine is easy to set up.
The standard settings include cutting pressure, cutting speed, blade holder scale, and material size.
Material size main...
MTB-CUT 180T
The material size setting depends on the actual material you are using.
By default, the machine is set to:
180 mm (width) × 120 mm (height)
Please pay attention to the o...
MTB-CUT 180T
"The material size setting depends on the type of material you are using.
Mietubl's standard material size is 180mm (width) x 120mm (height).
You can configure your machine accord...
MTB-CUT 180T
"When cutting back films, you need to consider both the pattern position and the cutting range. You can adjust these by setting the material size and enabling or disabling center c...
MTB-CUT 180T
"Here are some default setting ：material size is 180mm width × 120mm height.
Cutting pressure: 300
Cutting speed: 200
Blade holder scale: 5
These default settings are sui...
Showing 1
to 20
of 85 results
