Showing 41 results
for
"computer connection"
MTB-CUT 180T
At present, our smart screen protector machines do not support direct connection to a computer. All operations and data synchronization must be done through the machine’s built-in...
MTB-CUT 180T
If you are using a printer brand other than Canon or Epson (such as an HP printer without Wi-Fi), you will need to install the PrinterServer software on a computer.
Steps
1.Downl...
MTB-CUT 180T
If you are using a printer brand other than Canon or Epson (such as an HP printer without Wi-Fi), you will need to install the PrinterServer software on a computer.
Steps
1.Downl...
MTB-CUT 180T
When the screen protector cutting machine prompts you to enter an IP address while connecting to a printer, please note that this refers to the IP address of the computer where Pri...
MTB-CUT 180T
You can download the PrinterServer software from the link below:
https://www.mietubl.com/app/printerserver.rar
Please make sure to install it on a Windows computer, and keep the...
MTB-CUT 180T
"PrinterServer is mainly used to connect the smart screen protector cutting machine with a printer to enable personalized pattern printing and customization.
You can follow the ste...
MTB-CUT 180T
Our smart screen protector cutting machine uses a cloud-based database for data updates and currently does not support direct connection to a laptop. In the future, we may release...
MTB-CUT 180T
Our smart screen protector cutting machine uses a cloud-based database for data updates and currently does not support direct connection to a laptop. In the future, we may release...
MTB-CUT 180T
Currently, our screen protector cutting machines do not support LAN connection to a laptop.
The machines are designed to operate based on a cloud database system, and do not requi...
MTB-CUT 180T
The Mietubl screen protector cutting machine supports both Canon and Epson printers.
Among these, Canon G580 / G680 are highly recommended for best compatibility and print quality...
MTB-CUT 180T
"By default, the Mietubl screen protector cutting machine does not support direct PC connection.
The machine runs on an independent embedded operating system, and all templates and...
MTB-CUT 180T
"By default, the Mietubl screen protector cutting machine does not support direct PC or laptop connection.
The machine runs on an independent embedded operating system, and all tem...
MTB-CUT 180T
Yes. To create a custom rear film, you need to connect your screen protector cutting machine to a printer.
1. Connect the Devices
We recommend using the following printer models...
MTB-CUT 180T
How do I put my picture in it and stick it on my phone?
Yes. To create a custom rear film, you need to connect your screen protector cutting machine to a printer.
1. Connect the...
MTB-CUT 180T
The smart cutting machine supports Canon series printers, and we recommend using the Canon G580 / G680 models or any Canon printer that uses the same driver.
Note: Since cutting m...
MTB-CUT 180T
PrinterServer is the software that allows the screen protector cutting machine to work with different printer brands and models.
It must be installed on a Windows computer.
You c...
MTB-CUT 180T
"First, please check the barcode on the back of your machine:
For devices with a barcode format MT00XXXXXXXXXXX, the machine supports connection to Canon G580 / G680 and Epson L325...
MTB-CUT 180T
If the network connection is unstable while downloading model data/templates, please try the following:
Solution
Connect the machine to another Wi-Fi network
Or use a mobile hot...
MTB-CUT M188
"If the machine displays a “connection timeout” message during startup, it typically indicates a mainboard failure.
Please contact your local distributor to obtain a replacement ma...
MTB-CUT M288
The “Reconnection” message means that the screen cannot establish a proper connection with the mainboard.
This issue is typically caused by a loose or faulty screen-to...
Showing 1
to 20
of 41 results
