Showing 78 results
for
"install app"
MTB-CUT 180T
"You can reinstall the Cutter App by following these steps:
Open Browser
On the smart screen protector cutting machine, run the Chrome browser and enter the following address:
ht...
MTB-CUT 180T
If you are using a printer brand other than Canon or Epson (such as an HP printer without Wi-Fi), you will need to install the PrinterServer software on a computer.
Steps
1.Downl...
MTB-CUT 180T
If you are using a printer brand other than Canon or Epson (such as an HP printer without Wi-Fi), you will need to install the PrinterServer software on a computer.
Steps
1.Downl...
MTB-CUT 180T
Yes. To create a custom rear film, you need to connect your screen protector cutting machine to a printer.
1. Connect the Devices
We recommend using the following printer models...
MTB-CUT 180T
How do I put my picture in it and stick it on my phone?
Yes. To create a custom rear film, you need to connect your screen protector cutting machine to a printer.
1. Connect the...
MTB-CUT 180T
If you have accidentally deleted the Cutter app, you can reinstall it using the device’s built-in browser.
Please open the Chrome browser on the device and enter the followi...
MTB-CUT 180T
"You can set the Cutter App as the default startup app by following these steps:
Open the device System Settings.
Locate Cutter App (usually found under App Management or Defaul...
MTB-CUT 180T
This happens because the APP version was rolled back during the factory reset.
When the machine is reset, the system returns to the earliest APP version, and many new models added...
MTB-CUT 180T
You can download the PrinterServer software from the link below:
https://www.mietubl.com/app/printerserver.rar
Please make sure to install it on a Windows computer, and keep the...
MTB-CUT 180T
"If you start the screen protector cutting machine but the Cutter app does not launch automatically, this may be because the device was recently reset and the Cutter app has not be...
MTB-CUT 180T
When the screen protector cutting machine prompts you to enter an IP address while connecting to a printer, please note that this refers to the IP address of the computer where Pri...
MTB-CUT 180T
"PrinterServer is mainly used to connect the smart screen protector cutting machine with a printer to enable personalized pattern printing and customization.
You can follow the ste...
MTB-CUT 180T
PrinterServer is the software that allows the screen protector cutting machine to work with different printer brands and models.
It must be installed on a Windows computer.
You c...
MTB-CUT 180T
This issue is usually caused by app cache or data errors, preventing the app from running properly.
Please follow the instruction video to clear the app cache and data, then reope...
MTB-CUT 180T
"Cache is essential for ensuring the stable operation of the app. However, under certain circumstances — such as after an app update or when data models fail to load — clearing the...
MTB-CUT 180T
"We periodically release updates for the machine's app to improve performance and functionality.
The password required to perform the app upgrade is ""1212"".
Please note:
App...
MTB-CUT 180T
The smart cutting machine supports Canon series printers, and we recommend using the Canon G580 / G680 models or any Canon printer that uses the same driver.
Note: Since cutting m...
MTB-CUT 180T
"When the sensor malfunctions, the machine may fail to detect or automatically load the cutting material. You can try the following two approaches:
Replace the Sensor
If the senso...
MTB-CUT 180T
The Mietubl screen protector cutting machine supports both Canon and Epson printers.
Among these, Canon G580 / G680 are highly recommended for best compatibility and print quality...
MTB-CUT M288
"The silicone pad is one of the few parts in the MTB-CUT M288 intelligent film cutting and pasting machine that requires replacement.
It is essential for the proper installation of...
Showing 1
to 20
of 78 results
