The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size mainl...
The default paper size setting for mobile phone screen protectors is 180mm width × 120mm height. This size is suitable for most cutting needs, so you can generally keep this settin...
"The material size setting depends on the type of material you are using. Mietubl's standard material size is 180mm (width) x 120mm (height). You can configure your machine accord...
"This is caused by an incorrect ""Material Size"" setting. For custom cuts, you must first define the dimensions of the film you are using (e.g., 300x200 mm). The machine uses this...
The screen protector machine will automatically find the middle cutting position according to the material size setting. Adjust the material size setting to change the cutting rang...
The screen protector machine will automatically find the middle cutting position according to the material size setting. If you need to change the cutting range, adjust the materia...
"When cutting back films, you need to consider both the pattern position and the cutting range. You can adjust these by setting the material size and enabling or disabling center c...
"The privacy angle setting is mainly used for HD privacy cutting materials. Since screen structures and display effects vary across devices, there is no universal angle setting. Yo...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
The MTB-CUT 180T screen protector cutting machine supports a maximum cutting width of 228 mm, which corresponds to screen protectors up to approximately 16 inches in size. Notes:...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
"The cutting machine may work slowly if the cutting speed setting is too low. Please try setting the cutting speed to the default value of 200 and then attempt cutting again. If...
"Here are some default setting ：material size is 180mm width × 120mm height. Cutting pressure: 300 Cutting speed: 200 Blade holder scale: 5 These default settings are sui...
If the machine is operating slowly, it is usually because the cutting speed is set too low. You can adjust the setting by following these steps: Open the Settings page; Find the...
When cutting full-screen back films, please disable the "Cut Center" option on the cutting page. Additionally, ensure that the material size is set to 180mm x 120mm. Since the ful...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
"If the cut model from the machine is inaccurate, the possible reasons include: Incorrect model selection Make sure the selected cutting model in the machine matches the actual de...
"If the cutting machine stops halfway, it is usually due to incorrect material size or parameter settings. When the cutting carriage reaches the edge, it triggers the edge sensor,...
"Cutting misalignment is usually caused by: Center Cutting Not Enabled: Make sure the “Center Cutting” option is enabled on the cutting page so the machine automatically positions...
