If the machine is operating slowly, it is usually because the cutting speed is set too low. You can adjust the setting by following these steps: Open the Settings page; Find the...
In most cases, you can keep the cutting speed at the default value of 200. This setting works well for the majority of materials. When to reduce the speed You should lower the...
"The default cutting speed of the machine is 200. In most cases, keeping the default setting will deliver good cutting performance. You only need to reduce the speed in special sit...
"Our smart screen protector machine supports a cutting speed range of 0 ~ 500. Recommended Default Speed: 200 (suitable for most materials and mobile phone screen protectors) Lo...
The cutting speed does not have a major impact on most cutting tasks. In general: 👉 200 is the recommended default cutting speed. You only need to reduce the cutting speed when...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size mainl...
"The cutting machine may work slowly if the cutting speed setting is too low. Please try setting the cutting speed to the default value of 200 and then attempt cutting again. If...
In most cases, it is recommended to keep the cutting speed at the default value of 200. This setting is suitable for most cutting materials. The recommended blade pressure is: 30...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
Please keep speed at 200. The blade holder scale should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade s...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
If you want to improve cutting results, please follow these tips: Check Wheel Position Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
"Here are some default setting ：material size is 180mm width × 120mm height. Cutting pressure: 300 Cutting speed: 200 Blade holder scale: 5 These default settings are sui...
"The privacy angle setting is mainly used for HD privacy cutting materials. Since screen structures and display effects vary across devices, there is no universal angle setting. Yo...
The default paper size setting for mobile phone screen protectors is 180mm width × 120mm height. This size is suitable for most cutting needs, so you can generally keep this settin...
Our screen protector machine offers several advantages: 1. No cutting limit no need to pay for each cut. 2. Double motors for stronger cutting power. 3. Adjustable cutting pressure...
If you encounter problems while configuring the machine, you can try using the following default settings, which work for most materials: Recommended Default Settings Speed: 20...
"The recommended cutting parameters for back films are: Material Size: 180mm width × 120mm height Pressure: 300 Blade Holder Scale: 5 Speed: 200 These settings are suit...
"A slow APP startup is usually caused by excessive cached data slowing down performance. You can try the following steps: Clear the Cache: Follow the steps shown in the video to go...
The download time for data updates depends on: The connection speed between the cutting machine and the server The amount of data being updated In fact, as long as your mach...
