The material size setting depends on the actual material you are using. By default, the machine is set to: 180 mm (width) × 120 mm (height) Please pay attention to the o...
"The version test password feature is intended only for limited testing before a new version is officially released. It does not always take effect, and the default password is usu...
"The default parameters of the screen protector cutting machine — blade holder scale 5 and cutting pressure 300g — are suitable for most materials, including HD clear film. If the...
"The cutting machine may work slowly if the cutting speed setting is too low. Please try setting the cutting speed to the default value of 200 and then attempt cutting again. If...
"All cutting options on the smart screen protector machine are displayed by default, including camera lens protectors. You can find the lens cutting option under the specific phone...
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
The default paper size setting for mobile phone screen protectors is 180mm width × 120mm height. This size is suitable for most cutting needs, so you can generally keep this settin...
In most cases, it is recommended to keep the cutting speed at the default value of 200. This setting is suitable for most cutting materials. The recommended blade pressure is: 30...
"Our smart screen protector machine supports a cutting speed range of 0 ~ 500. Recommended Default Speed: 200 (suitable for most materials and mobile phone screen protectors) Lo...
Please keep speed at 200. The blade holder scale should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade s...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
The cutting speed does not have a major impact on most cutting tasks. In general: 👉 200 is the recommended default cutting speed. You only need to reduce the cutting speed when...
"By default, the Mietubl screen protector cutting machine does not support direct PC connection. The machine runs on an independent embedded operating system, and all templates and...
"By default, the Mietubl screen protector cutting machine does not support direct PC or laptop connection. The machine runs on an independent embedded operating system, and all tem...
If the machine is operating slowly, it is usually because the cutting speed is set too low. You can adjust the setting by following these steps: Open the Settings page; Find the...
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
"The Word Cutting feature is only available in version 3.0.03 and above. You can check your current app version by going to "About This Device". https://osscdn.mietubl.com/ima...
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device If your version is lower than 3.0.03, please go...
As of March 2026, the latest APP version is 3.0.05. You can go to: “Mine” → “APP version update” to check and update to the latest version. If you...
