Showing 245 results
for
"cutting template"
MTB-CUT 180T
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material.
The thicker the material, the higher the blade holder scale...
MTB-CUT 180T
This issue is usually caused by a loose carriage, resulting in unstable cutting paths and improper round cutting.
Please follow these steps:
Refer to the instruction video and re...
MTB-CUT 180T
"The recommended cutting parameters for UV materials on the screen protector cutting machine are:
Blade holder scale: 6, Cutting pressure: 380.
If the machine cannot cut properl...
MTB-CUT 180T
"The cutting machine may work slowly if the cutting speed setting is too low.
Please try setting the cutting speed to the default value of 200 and then attempt cutting again.
If...
MTB-CUT 180T
This issue is usually caused by the rollers not gripping the material properly, allowing it to shift during cutting.
Please check the following:
Ensure all rollers are positioned...
MTB-CUT 180T
"The default cutting speed of the machine is 200. In most cases, keeping the default setting will deliver good cutting performance.
You only need to reduce the speed in special sit...
MTB-CUT 180T
"The recommended cutting parameters for back films are:
Material Size: 180mm width × 120mm height
Pressure: 300
Blade Holder Scale: 5
Speed: 200
These settings are suit...
MTB-CUT 180T
If the circle cut is not perfect, the issue is usually caused by a loose cutting carriage, which makes the cutting path unstable and results in an imperfect circle.
Please follo...
MTB-CUT 180T
"The machine is equipped with X-axis and Y-axis motors. The X-axis motor is responsible for controlling the horizontal (left-right) movement of the cutting Car.
If the X-axis belt...
MTB-CUT M188
"In the MTB-CUT M188 screen protector cutting machine, the rubber strip at the bottom of the cutting module is designed to protect the cutting blade and extend the lifespan of both...
MTB-CUT M188
This video provides a step-by-step guide on how to replace the cutting module spring of the MTB-CUT M188 screen protector cutting machine to resolve the issue of the cutting module...
MTB-CUT 180T
If the machine displays a “Time Out” error during film cutting, please follow the steps below:
1. Check whether the motherboard is connected
On the machine, go to:...
MTB-CUT 180T
All of our screen protector cutting machines (Including: 180T / M188 / M288 ) support the counting and statistics function.
You can check the cutting and sales statistics by going...
MTB-CUT 180T
Our screen protector machine offers several advantages:
1. No cutting limit no need to pay for each cut.
2. Double motors for stronger cutting power.
3. Adjustable cutting pressure...
MTB-CUT 180T
"The default parameters of the screen protector cutting machine — blade holder scale 5 and cutting pressure 300g — are suitable for most materials, including HD clear film.
If the...
MTB-CUT 180T
If you are using standard back film, please follow these steps:
Set the material size in settings according to your actual material (e.g., 180 × 120 mm)
Enable the &ldquo...
MTB-CUT 180T
If you are using standard back film, please follow these steps:
Set the material size in settings according to your actual material (e.g., 180 × 120 mm)
Enable the &ldquo...
MTB-CUT 180T
"The intelligent film cutting machine has two belts:
One is used to control the left-right movement of the carriage
https://osscdn.mietubl.com/images/X-axis-belt.jpg
The othe...
MTB-CUT 180T
"If the machine shows an “Insufficient Cutting Times” message, please send your machine username to the dealer who sold you the machine.
They will add more cutting times for your a...
MTB-CUT 180T
"When cutting full-wrap back films, please disable the “Center Cut” option on the cutting page.
This is because full-wrap back films have larger dimensions,
so you can either use...
Showing 61
to 80
of 245 results
