Center Cutting is a function that positions the cutting area exactly in the center of the material. The cutting position is calculated based on the width and height values you ent...
"This is caused by an incorrect ""Material Size"" setting. For custom cuts, you must first define the dimensions of the film you are using (e.g., 300x200 mm). The machine uses this...
Please go to: Mine → Data Update to manually update the template data. In fact, as long as your machine is connected to the internet, it will automatically perform...
"To create a custom rear film, you need to connect your screen protector cutting machine to a printer. Steps: Connect the Devices It’s recommended to use Epson or Canon printer...
Sorry, the current Mietubl screen protector cutting machine does not support direct connection to a mobile app. All operations are performed via the device's touchscreen.
If the sensor is not working, please follow these steps: 1. Check Auto-loading setting Go to Settings and check if the “Auto-loading” option is disabled. If it is di...
"This issue can be caused by several reasons: Low Cutting Pressure Check your cutting pressure settings. If the pressure is too low, the blade holder won’t drop enough to tou...
The Mietubl MTB-CUT 180T Series screen protector cutting machines support connecting to a printer for printing customized phone back films. Please follow the operation video to co...
"The machine is equipped with X-axis and Y-axis motors. The X-axis motor is responsible for controlling the horizontal (left-right) movement of the cutting Car. If the X-axis belt...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
"The rollers are primarily responsible for controlling the forward and backward movement of the material. Please note: Pay close attention to the position of the black pads on the...
This video demonstrates how to restore the machine to its factory settings. Performing a factory reset will return the device to its original working state. Please note: Any app...
Please cut within the disabled the "cut center" option, and then try cutting again.
If you want to create a new custom template, you can use the machine’s built-in Custom Template function. This feature allows you to manually enter: Width Height Corner...
If the film is being cut crookedly or the cutting position is inaccurate, further inspection is required. Please click the WhatsApp button below and send our technical support tea...
"If the machine is unable to cut screen protector materials properly, please first try the following steps: Replace the blade and blade holder with new ones. Set the cutting pre...
The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material. The thicker the material, the higher the blade holder scale...
The Mietubl MTB-CUT 180T Screen Protector Cutting Machine does not support direct connection to the DHP511 Photo Printer. The MTB-CUT 180T and DHP511 are two independent machines...
"If you start the screen protector cutting machine but the Cutter app does not launch automatically, this may be because the device was recently reset and the Cutter app has not be...
The Mietubl MTB-CUT 180T Screen Protector Cutting Machine is unlocked and has no cutting limit. You can perform as many cuts as needed without worrying about the number of remaini...
