Showing 266 results
for
"cutting parameters"
MTB-CUT 180T
"By default, the Mietubl screen protector cutting machine does not support direct PC or laptop connection.
The machine runs on an independent embedded operating system, and all tem...
MTB-CUT 180T
If the film is being damaged during cutting, the Blade Holder Scale may be set too high.
Please try reducing the Blade Holder Scale.
👉 Recommended Blade Holder Scale: 5
Under n...
MTB-CUT 180T
The print quality of customized photos is not related to the screen protector cutting machine. It mainly depends on the printer and its printing performance.
If you requir...
MTB-CUT 180T
"Loosening of the car from the guide rail is one of the main causes of cutting distortion.
If such an issue occurs, it is necessary to adjust the clearance between the car and the...
MTB-CUT 180T
If the film is being cut crookedly or the cutting position is inaccurate, further inspection is required.
Please click the WhatsApp button below and send our technical support tea...
MTB-CUT 180T
The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material.
The thicker the material, the higher the blade holder scale...
MTB-CUT 180T
"This video provides a step-by-step guide on how to repair the cutting Car.
Please note:
When reinstalling the Car, pay close attention to the clearance between the Car and the gu...
MTB-CUT M688/M288
The screen protector machine will automatically find the middle cutting position according to the material size setting. Adjust the material size setting to change the cutting rang...
MTB-CUT M688/M288
Sorry, the cutting machine does not have an app for Android or iOS. Manual placement of cutting material makes the app unnecessary.
MTB-CUT M688/M288
"If the MTB-CUT M288 intelligent film cutting and pasting machine displays a ""Reconnection"" message at startup or if the cutting Car fails to cut properly, the mainboard may be f...
MTB-CUT M188
The screen protector machine will automatically find the middle cutting position according to the material size setting. If you need to change the cutting range, adjust the materia...
MTB-CUT M188
Sorry, the cutting machine does not have an app for Android or iOS. The reason is that you need to manually place the cutting material on the machine, and using an app to operate t...
MTB-CUT M188
"The roller in the MTB-CUT M188 screen protector cutting machine is primarily responsible for controlling the forward and backward movement of the cutting material.
If the cutting...
MTB-CUT M188
This video provides a guide on how to replace the cutting module of the MTB-CUT M188 screen protector cutting machine. https://mietublcom.oss-accelerate.aliyuncs.com/service/videos...
MTB-CUT M188
"If the MTB-CUT M288 intelligent film cutting and pasting machine displays a ""Reconnection"" message at startup or if the cutting Car fails to cut properly, the mainboard may be f...
MTB-CUT 180T
If the machine is operating slowly, it is usually because the cutting speed is set too low.
You can adjust the setting by following these steps:
Open the Settings page;
Find the...
MTB-CUT 180T
The MTB-CUT 180T screen protector cutting machine supports a maximum cutting width of 228 mm,
which corresponds to screen protectors up to approximately 16 inches in size.
Notes:...
MTB-CUT 180T
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT 180T
This issue is usually caused by the cutting carriage becoming loose from the guide rail. When the carriage is not firmly fixed, the blade cannot follow an accurate circular path, r...
MTB-CUT M688/M288
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
Showing 81
to 100
of 266 results
