If you encounter problems while configuring the machine, you can try using the following default settings, which work for most materials: Recommended Default Settings Speed: 20...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size mainl...
"If you want to change the language, follow these steps: Change the language inside the Cutter App Open Cutter App. Go to the Settings menu. Find the Language option and s...
Our screen protector cutting machine provides five built-in pressure preset slots. You can rename these presets and save the pressure settings for your commonly used cutting mater...
If you are using standard back film, please follow these steps: Set the material size in settings according to your actual material (e.g., 180 × 120 mm) Enable the &ldquo...
"Here are some default setting ：material size is 180mm width × 120mm height. Cutting pressure: 300 Cutting speed: 200 Blade holder scale: 5 These default settings are sui...
If the machine is operating slowly, it is usually because the cutting speed is set too low. You can adjust the setting by following these steps: Open the Settings page; Find the...
If the screen protector cutting machine fails to load phone models correctly, it may be caused by incorrect language settings or app data issues. Please follow the instruction vid...
"To restore the machine settings, follow these steps: Restart the device As the machine is starting up, quickly tap the blue icon 10 times Select "Factory Reset" Please no...
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material. The thicker the material, the higher the blade holder scale...
There are two ways to change the language on the machine: 1. From the login screen You can select your preferred language directly from the language option on the login page....
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
"If the cutting machine stops halfway, it is usually due to incorrect material size or parameter settings. When the cutting carriage reaches the edge, it triggers the edge sensor,...
"Cutting misalignment is usually caused by: Center Cutting Not Enabled: Make sure the “Center Cutting” option is enabled on the cutting page so the machine automatically positions...
The correct Gear Ratio settings are: X-axis: 2000 Y-axis: 2000 Please do NOT modify the Gear Ratio settings. Incorrect Gear Ratio values may cause the machine to malfun...
This video demonstrates how to restore the machine to its factory settings. Performing a factory reset will return the device to its original working state. Please note: Any app...
Restoring the MTB-CUT M188 screen protector cutting machine to its factory settings can resolve most software-related issues. This video provides a step-by-step guide on how to pe...
This issue is usually caused by incorrect language settings or app data problems, resulting in the product page not displaying properly. Please follow the instruction video to cle...
"If the sensor is not working, please check whether it has been disabled in the settings. Go to Settings, find the option “Material Auto-feeding”, and make sure it is turned ON....
