If the machine is operating slowly, it is usually because the cutting speed is set too low. You can adjust the setting by following these steps: Open the Settings page; Find the...
"Our smart screen protector machine supports a cutting speed range of 0 ~ 500. Recommended Default Speed: 200 (suitable for most materials and mobile phone screen protectors) Lo...
The cutting speed does not have a major impact on most cutting tasks. In general: 👉 200 is the recommended default cutting speed. You only need to reduce the cutting speed when...
In most cases, you can keep the cutting speed at the default value of 200. This setting works well for the majority of materials. When to reduce the speed You should lower the...
"The default cutting speed of the machine is 200. In most cases, keeping the default setting will deliver good cutting performance. You only need to reduce the speed in special sit...
In most cases, it is recommended to keep the cutting speed at the default value of 200. This setting is suitable for most cutting materials. The recommended blade pressure is: 30...
Please keep speed at 200. The blade holder scale should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade s...
If you want to improve cutting results, please follow these tips: Check Wheel Position Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
"The cutting machine may work slowly if the cutting speed setting is too low. Please try setting the cutting speed to the default value of 200 and then attempt cutting again. If...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size mainl...
If you encounter problems while configuring the machine, you can try using the following default settings, which work for most materials: Recommended Default Settings Speed: 20...
"The recommended cutting parameters for back films are: Material Size: 180mm width × 120mm height Pressure: 300 Blade Holder Scale: 5 Speed: 200 These settings are suit...
It is generally recommended to replace the blade after around 300 cuts. The actual replacement frequency may vary depending on material type and usage. If cutting quality...
The Mietubl screen protector cutting machine supports both Canon and Epson printers. Among these, Canon G580 / G680 are highly recommended for best compatibility and print quality...
" There are a certain list of the printer models that are supported, and Canon G580, G680 is mainly recommended. Recommended Canon G58...
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
Our screen protector machine offers several advantages: 1. No cutting limit no need to pay for each cut. 2. Double motors for stronger cutting power. 3. Adjustable cutting pressure...
"Here are some default setting ：material size is 180mm width × 120mm height. Cutting pressure: 300 Cutting speed: 200 Blade holder scale: 5 These default settings are sui...
