If the machine is vibrating abnormally, please check the following two points: 1. Check the transportation screw If this is a new machine, please make sure the screw on the back...
When you first receive the machine, you must remove the transport-locking screw located on the back of the device to prevent damage to the blade carriage. During normal daily us...
This issue is usually caused by a loose carriage, resulting in unstable cutting paths and improper round cutting. Please follow these steps: Refer to the instruction video and re...
If the circle cut is not perfect, the issue is usually caused by a loose cutting carriage, which makes the cutting path unstable and results in an imperfect circle. Please follo...
If the camera lens cutout appears oval-shaped, it is likely caused by a loose carriage. Please follow these steps: Refer to the instructional video to refit the carriage onto the...
"Loosening of the car from the guide rail is one of the main causes of cutting distortion. If such an issue occurs, it is necessary to adjust the clearance between the car and the...
If the main holder (blade carriage holder) becomes loose and you need to press it by hand for proper cutting, this means the part is worn out or has lost stability. The cutting ho...
