If the machine is operating slowly, it is usually because the cutting speed is set too low. You can adjust the setting by following these steps: Open the Settings page; Find the...
"The default cutting speed of the machine is 200. In most cases, keeping the default setting will deliver good cutting performance. You only need to reduce the speed in special sit...
"Our smart screen protector machine supports a cutting speed range of 0 ~ 500. Recommended Default Speed: 200 (suitable for most materials and mobile phone screen protectors) Lo...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
"The cutting machine may work slowly if the cutting speed setting is too low. Please try setting the cutting speed to the default value of 200 and then attempt cutting again. If...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size mainl...
If you want to improve cutting results, please follow these tips: Check Wheel Position Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
Our screen protector machine offers several advantages: 1. No cutting limit no need to pay for each cut. 2. Double motors for stronger cutting power. 3. Adjustable cutting pressure...
"Here are some default setting ：material size is 180mm width × 120mm height. Cutting pressure: 300 Cutting speed: 200 Blade holder scale: 5 These default settings are sui...
"The recommended cutting parameters for back films are: Material Size: 180mm width × 120mm height Pressure: 300 Blade Holder Scale: 5 Speed: 200 These settings are suit...
"A slow APP startup is usually caused by excessive cached data slowing down performance. You can try the following steps: Clear the Cache: Follow the steps shown in the video to go...
