Showing 51 results
for
"default settings"
MTB-CUT 180T
"You can set the Cutter App as the default startup app by following these steps:
Open the device System Settings.
Locate Cutter App (usually found under App Management or Defaul...
MTB-CUT 180T
"The intelligent film cutting machine is easy to set up.
The standard settings include cutting pressure, cutting speed, blade holder scale, and material size.
Material size main...
MTB-CUT 180T
"The intelligent film cutting machine is easy to set up.
The standard settings include cutting pressure, cutting speed, blade holder scale, and material size.
Material size mainl...
MTB-CUT 180T
"Here are some default setting ：material size is 180mm width × 120mm height.
Cutting pressure: 300
Cutting speed: 200
Blade holder scale: 5
These default settings are sui...
MTB-CUT 180T
"The intelligent film cutting machine is easy to set up.
The standard settings include cutting pressure, cutting speed, blade holder scale, and material size.
Material size main...
MTB-CUT 180T
"The default cutting speed of the machine is 200. In most cases, keeping the default setting will deliver good cutting performance.
You only need to reduce the speed in special sit...
MTB-CUT 180T
"If you start the screen protector cutting machine but the Cutter app does not launch automatically, this may be because the device was recently reset and the Cutter app has not be...
MTB-CUT 180T
If the machine is operating slowly, it is usually because the cutting speed is set too low.
You can adjust the setting by following these steps:
Open the Settings page;
Find the...
MTB-CUT 180T
"The default parameters of the screen protector cutting machine — blade holder scale 5 and cutting pressure 300g — are suitable for most materials, including HD clear film.
If the...
MTB-CUT 180T
"The cutting machine may work slowly if the cutting speed setting is too low.
Please try setting the cutting speed to the default value of 200 and then attempt cutting again.
If...
MTB-CUT 180T
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material.
Thicker or harder materials require a higher blade size, while thi...
MTB-CUT 180T
This issue is usually caused by a mismatch between the material size settings and the template being used.
When cutting full back film, the cutting area is larger than standard te...
MTB-CUT 180T
"If you want to change the language, follow these steps:
Change the language inside the Cutter App
Open Cutter App.
Go to the Settings menu.
Find the Language option and s...
MTB-CUT 180T
Our screen protector cutting machine provides five built-in pressure preset slots.
You can rename these presets and save the pressure settings for your commonly used cutting mater...
MTB-CUT 180T
"The version test password feature is intended only for limited testing before a new version is officially released.
It does not always take effect, and the default password is usu...
MTB-CUT 180T
"All cutting options on the smart screen protector machine are displayed by default, including camera lens protectors. You can find the lens cutting option under the specific phone...
MTB-CUT 180T
The default paper size setting for mobile phone screen protectors is 180mm width × 120mm height. This size is suitable for most cutting needs, so you can generally keep this settin...
MTB-CUT 180T
"Our smart screen protector machine supports a cutting speed range of 0 ~ 500.
Recommended Default Speed: 200 (suitable for most materials and mobile phone screen protectors)
Lo...
MTB-CUT 180T
"By default, the Mietubl screen protector cutting machine does not support direct PC connection.
The machine runs on an independent embedded operating system, and all templates and...
MTB-CUT 180T
"By default, the Mietubl screen protector cutting machine does not support direct PC or laptop connection.
The machine runs on an independent embedded operating system, and all tem...
Showing 1
to 20
of 51 results
