If you encounter problems while configuring the machine, you can try using the following default settings, which work for most materials: Recommended Default Settings Speed: 20...
Please keep speed at 200. The blade holder scale should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade s...
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
It is generally recommended to replace the blade after around 300 cuts. The actual replacement frequency may vary depending on material type and usage. If cutting quality...
In most cases, it is recommended to keep the cutting speed at the default value of 200. This setting is suitable for most cutting materials. The recommended blade pressure is: 30...
The Mietubl screen protector cutting machine supports both Canon and Epson printers. Among these, Canon G580 / G680 are highly recommended for best compatibility and print quality...
" There are a certain list of the printer models that are supported, and Canon G580, G680 is mainly recommended. Recommended Canon G58...
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material. The thicker the material, the higher the blade holder scale...
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
The Blade Holder Scale depends on the thickness of the material. For most TPU screen protector materials, the following settings are recommended: Blade Size: 5 Pressure: 300 &n...
The Blade Holder Scale depends on the thickness of the material. For most Back Film materials, the recommended settings are: Blade Size: 4 Pressure: 300 These settings...
If the machine is operating slowly, it is usually because the cutting speed is set too low. You can adjust the setting by following these steps: Open the Settings page; Find the...
Installing a UV screen protector is different from applying regular screen protector materials. UV protectors require an additional curing step to harden the surface. Steps &...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
The correct cutting parameters depend on the materials being used. Here are some recommended settings for common materials: Material | Back Film | Four Layer Soft Film | Explosion-...
"The recommended cutting parameters for UV materials on the screen protector cutting machine are: Blade holder scale: 6, Cutting pressure: 380. If the machine cannot cut properl...
This issue is usually caused by a faulty motherboard controlling the carriage. It is recommended to contact your local distributor to obtain a replacement motherboard. Please refe...
"The recommended cutting parameters for back films are: Material Size: 180mm width × 120mm height Pressure: 300 Blade Holder Scale: 5 Speed: 200 These settings are suit...
Under normal conditions, we recommend replacing the blade after approximately: 300 cuts However, this is only a recommended value. The actual blade lifespan may increase or decre...
If you want to improve cutting results, please follow these tips: Check Wheel Position Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
