The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
Large-size screen protectors such as iPad and laptop films have longer cutting paths. During long-distance cutting, the material may slightly shift due to the blade pressure, whic...
The Cut Centered option is used to position the cutting area exactly in the center of the material size you set. For example, if your material size is set to 180mm (width) ×...
The machine can cut materials of various thicknesses by adjusting the cutter scale accordingly.
Our screen protector machine offers several advantages: 1. No cutting limit no need to pay for each cut. 2. Double motors for stronger cutting power. 3. Adjustable cutting pressure...
"Incorrect cutting shapes are most likely caused by incorrect wheels positioning. When using the machine, please ensure that all wheels are pressing on the black strip, as shown in...
"The default cutting speed of the machine is 200. In most cases, keeping the default setting will deliver good cutting performance. You only need to reduce the speed in special sit...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
"If the tablet screen protector is not cutting well, it is usually because the roller is not providing enough pressure. You can try the following solutions: Lift the gear at the ba...
"Uneven film widths after cutting are usually caused by incorrect wheel positioning. If the wheels are pressing on the smooth part, they cannot firmly hold the film, leading to inc...
If the camera lens cutout appears oval-shaped, it is likely caused by a loose carriage. Please follow these steps: Refer to the instructional video to refit the carriage onto the...
"This error usually means the cutting carriage (X-axis motor) is stuck or cannot find its home position. - Step 1: Press and hold the power button for 20 seconds to restart the mac...
"If the cutting Car fails to stop properly when reaching the edge and produces a loud noise, it is likely due to an error in the Car’s limit positioning. You can replace specific p...
