If the screen protector cutting machine fails to load phone models correctly, it may be caused by incorrect language settings or app data issues. Please follow the instruction vid...
This issue is usually caused by incorrect language settings or app data problems, resulting in the product page not displaying properly. Please follow the instruction video to cle...
"If the sensor is not working, please check whether it has been disabled in the settings. Go to Settings, find the option “Material Auto-feeding”, and make sure it is turned ON....
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material. The thicker the material, the higher the blade holder scale...
If you are using standard back film, please follow these steps: Set the material size in settings according to your actual material (e.g., 180 × 120 mm) Enable the &ldquo...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
"The settings button is only available when the device is logged in. You can log in to your account again to find this button. If, for some reason, you cannot log in successfull...
If you are using standard back film, please follow these steps: Set the material size in settings according to your actual material (e.g., 180 × 120 mm) Enable the &ldquo...
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
"If the cutting machine stops halfway, it is usually due to incorrect material size or parameter settings. When the cutting carriage reaches the edge, it triggers the edge sensor,...
"You can set the Cutter App as the default startup app by following these steps: Open the device System Settings. Locate Cutter App (usually found under App Management or Defaul...
"Cutting misalignment is usually caused by: Center Cutting Not Enabled: Make sure the “Center Cutting” option is enabled on the cutting page so the machine automatically positions...
Please keep speed at 200. The blade holder scale should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade s...
The correct Gear Ratio settings are: X-axis: 2000 Y-axis: 2000 Please do NOT modify the Gear Ratio settings. Incorrect Gear Ratio values may cause the machine to malfun...
The Blade Holder Scale depends on the thickness of the material. For most TPU screen protector materials, the following settings are recommended: Blade Size: 5 Pressure: 300 &n...
The Blade Holder Scale depends on the thickness of the material. For most Back Film materials, the recommended settings are: Blade Size: 4 Pressure: 300 These settings...
If the machine is operating slowly, it is usually because the cutting speed is set too low. You can adjust the setting by following these steps: Open the Settings page; Find the...
Installing a UV screen protector is different from applying regular screen protector materials. UV protectors require an additional curing step to harden the surface. Steps &...
There are two ways to change the language on the machine: 1. From the login screen You can select your preferred language directly from the language option on the login page....
Yes, the screen protector machine can cut PET material. However, you may need to adjust the machine settings, and keep in mind that PET material is more likely to wear out the cutt...
