Showing 140 results
for
"width"
MTB-CUT 180T
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material.
The thicker the material, the higher the blade holder scale...
MTB-CUT 180T
"The intelligent film cutting machine is easy to set up.
The standard settings include cutting pressure, cutting speed, blade holder scale, and material size.
Material size main...
MTB-CUT 180T
As of March 2026, the latest APP version is 3.0.05.
You can go to: “Mine” → “APP version update” to check and update to the latest version.
If you...
MTB-CUT 180T
This issue is usually caused by the rollers not gripping the material properly, allowing it to shift during cutting.
Please check the following:
Ensure all rollers are positioned...
MTB-CUT 180T
Please first check whether the device can display the Wi-Fi list.
If the Wi-Fi list cannot be displayed: it may indicate a Wi-Fi module issue within the screen, and the screen nee...
MTB-CUT 180T
If you are using standard back film, please follow these steps:
Set the material size in settings according to your actual material (e.g., 180 × 120 mm)
Enable the &ldquo...
MTB-CUT 180T
"When cutting back films, you need to consider both the pattern position and the cutting range. You can adjust these by setting the material size and enabling or disabling center c...
MTB-CUT 180T
This issue may be caused by a WiFi module failure in the screen assembly.
Step 1: Check whether the WiFi list can be loaded
Please open the WiFi settings page and check whether t...
MTB-CUT 180T
The correct material (paper) size setting is:
180 mm × 120 mm
Please make sure the material is placed in the correct direction before cutting.
MTB-CUT 180T
The default paper size setting for mobile phone screen protectors is 180mm width × 120mm height. This size is suitable for most cutting needs, so you can generally keep this settin...
MTB-CUT 180T
"The recommended cutting parameters for back films are:
Material Size: 180mm width × 120mm height
Pressure: 300
Blade Holder Scale: 5
Speed: 200
These settings are suit...
MTB-CUT 180T
If you discover a size cutting problem during cutting, please send us the following information:
The phone’s System Information page
The corresponding cutting template/mode...
MTB-CUT 180T
To connect an Epson printer, you need to update the machine APP first.
Steps
Go to:
Mine → APP Version Update → Test Version → Enter the update password: 202...
MTB-CUT 180T
In most cases, it is recommended to keep the cutting speed at the default value of 200.
This setting is suitable for most cutting materials.
The recommended blade pressure is: 30...
MTB-CUT 180T
"Our smart screen protector machine comes with a custom template option. You can easily create your own template by entering just a few parameters.
Steps:
On the main interface,...
MTB-CUT 180T
"Our smart screen protector machine comes with a custom template option. You can easily create your own template by entering just a few parameters.
Steps:
On the main interface,...
MTB-CUT 180T Pro
Please keep speed at 200.
The blade holder scale should be adjusted based on the thickness and hardness of the film material.
Thicker or harder materials require a higher blade s...
MTB-CUT 180T
This issue is usually caused by a mismatch between the material size settings and the template being used.
When cutting full back film, the cutting area is larger than standard te...
MTB-CUT 180T
"This error usually means the cutting carriage (X-axis motor) is stuck or cannot find its home position.
- Step 1: Press and hold the power button for 20 seconds to restart the mac...
MTB-CUT 180T
A Full Back template refers to a full-wrap back film that covers:
The back of the phone
The side edges
The curved corners around the device
Compared with normal back films,...
Showing 101
to 120
of 140 results
