Showing 320 results
for
"machine settings"
MTB-CUT M188
"If the screen protector cutting machine is unable to load cutting materials properly, it may be due to a malfunctioning sensor.
This video provides a step-by-step guide on how to...
MTB-CUT M188
"The top cover of the M288 machine is secured with pins.
If the top cover comes off, you can follow the method shown in the video to properly lock the top cover back in place." htt...
MTB-CUT M188
"The MTB-CUT M288 intelligent film cutting and pasting machine uses a modular fixture design.
If the fixture is unable to properly hold the phone, you can quickly replace it using...
MTB-CUT 180T
You can adjust the cutting location by modifying the Material Size and enabling or disabling the Cut Center function.
Here’s how it works:
When “Cut Center” is...
MTB-CUT 180T
The MTB-CUT 180T screen protector cutting machine supports a maximum cutting width of 228 mm,
which corresponds to screen protectors up to approximately 16 inches in size.
Notes:...
MTB-CUT 180T
This issue usually occurs after replacing the machine’s mainboard.
Because the machine ID is originally bound to the old mainboard, installing a new mainboard requires the I...
MTB-CUT M688/M288
If the MTB-CUT M288 triggers an alarm during the installation process—especially when installing on iPhone models—please don't worry.
This happens because the silicone...
MTB-CUT M688/M288
You can follow the video tutorial provided below to operate the MTB-CUT M288 intelligent cutting and pasting machine.
The video demonstrates all the required steps for proper cutt...
MTB-CUT M688/M288
The “Reconnection” message means that the screen cannot establish a proper connection with the mainboard.
This issue is typically caused by a loose or faulty screen-to...
MTB-CUT 180T
Yes. To create a custom rear film, you need to connect your screen protector cutting machine to a printer.
1. Connect the Devices
We recommend using the following printer models...
MTB-CUT 180T
How do I put my picture in it and stick it on my phone?
Yes. To create a custom rear film, you need to connect your screen protector cutting machine to a printer.
1. Connect the...
MTB-CUT 180T
You can access your machine’s cutting activity from the Cutting Records section on the home page.
There, you will find the daily and 30-day cutting statistics.
If you req...
MTB-CUT 180T
Large-size screen protectors such as iPad and laptop films have longer cutting paths.
During long-distance cutting, the material may slightly shift due to the blade pressure, whic...
MTB-CUT 180T
If you need to recharge (add cutting balance or renew your service) for the machine, please contact the local distributor who sold the device to you.
Your distributor will...
MTB-CUT 180T
According to your description, this issue is usually caused by a short circuit on the motherboard or a motherboard failure. When the motherboard fails to complete the self-test, th...
MTB-CUT 180T
If the blade does not drop properly during cutting, this issue is most likely caused by a mainboard malfunction.
The blade-down action is controlled by the Y-axis motor signal fro...
MTB-CUT 180T
This issue usually occurs when cutting full back film templates while the “Cut Center” option is enabled.
Solution
When cutting full back films, please disable the &l...
MTB-CUT 180T
All of our screen protector cutting machines (Including: 180T / M188 / M288 ) support the counting and statistics function.
You can check the cutting and sales statistics by going...
MTB-CUT 180T
Please click the WhatsApp button below and send the following information to our technical staff:
A description of the error
A clear photo of the machine’s QR code
...
MTB-CUT 180T
You can download the PrinterServer software from the link below:
https://www.mietubl.com/app/printerserver.rar
Please make sure to install it on a Windows computer, and keep the...
Showing 221
to 240
of 320 results
