Showing 49 results
for
"blade depth"
MTB-CUT 180T
"This can be caused by several issues:
- Incorrect Power Supply: Ensure you are using the original power adapter. An incorrect adapter can cause insufficient power.
- Blade Pressu...
MTB-CUT 180T Pro
The Blade Holder Scale depends on the thickness of the material.
For most TPU screen protector materials, the following settings are recommended:
Blade Size: 5
Pressure: 300
&n...
MTB-CUT 180T Pro
The Blade Holder Scale depends on the thickness of the material.
For most Back Film materials, the recommended settings are:
Blade Size: 4
Pressure: 300
These settings...
MTB-CUT 180T
"This issue can be caused by several reasons:
Low Cutting Pressure
Check your cutting pressure settings.
If the pressure is too low, the blade holder won’t drop enough to tou...
MTB-CUT 180T
The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material.
The thicker the material, the higher the blade holder scale...
MTB-CUT 180T
Please first confirm the specific issue you are facing:
1. If the blade holder does not go down during cutting
This is usually caused by a mainboard malfunction.
In this case, t...
MTB-CUT 180T
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material.
The thicker the material, the higher the blade holder scale...
MTB-CUT 180T
"The default parameters of the screen protector cutting machine — blade holder scale 5 and cutting pressure 300g — are suitable for most materials, including HD clear film.
If the...
MTB-CUT 180T
"The recommended cutting parameters for UV materials on the screen protector cutting machine are:
Blade holder scale: 6, Cutting pressure: 380.
If the machine cannot cut properl...
MTB-CUT 180T
"The intelligent film cutting machine is easy to set up.
The standard settings include cutting pressure, cutting speed, blade holder scale, and material size.
Material size main...
MTB-CUT 180T
"Here are some default setting ：material size is 180mm width × 120mm height.
Cutting pressure: 300
Cutting speed: 200
Blade holder scale: 5
These default settings are sui...
MTB-CUT 180T
In most cases, it is recommended to keep the cutting speed at the default value of 200.
This setting is suitable for most cutting materials.
The recommended blade pressure is: 30...
MTB-CUT 180T
"If the machine is unable to cut screen protector materials properly, please first try the following steps:
Replace the blade and blade holder with new ones.
Set the cutting pre...
MTB-CUT M188
"In the MTB-CUT M188 screen protector cutting machine, the rubber strip at the bottom of the cutting module is designed to protect the cutting blade and extend the lifespan of both...
MTB-CUT 180T
When the machine beeps with a repeated “bip bip” sound and fails to start cutting, it usually means that the X-axis or Y-axis cannot operate normally.
Common causes include a stuc...
MTB-CUT 180T
Yes, the screen protector machine can cut PET material. However, you may need to adjust the machine settings, and keep in mind that PET material is more likely to wear out the cutt...
MTB-CUT 180T
Yes, we offer a one-year warranty for our screen protector machine. Skilled technicians will provide free product consultation services. Please note that consumables like the cutti...
MTB-CUT 180T
The correct cutting parameters depend on the materials being used. Here are some recommended settings for common materials:
Material | Back Film | Four Layer Soft Film | Explosion-...
MTB-CUT 180T
No, the machine uses a blade to cut, which makes it safe, quiet, and pollution-free ideal for use in locations like shopping malls or at home.
MTB-CUT 180T
This issue is usually caused by the rollers not gripping the material properly, allowing it to shift during cutting.
Please check the following:
Ensure all rollers are positioned...
Showing 21
to 40
of 49 results
