If you are using standard back film, please follow these steps: Set the material size in settings according to your actual material (e.g., 180 × 120 mm) Enable the &ldquo...
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device If your version is lower than 3.0.03, please go...
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device If your version is lower than 3.0.03, please go...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size mainl...
"Here are some default setting ：material size is 180mm width × 120mm height. Cutting pressure: 300 Cutting speed: 200 Blade holder scale: 5 These default settings are sui...
"The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device"".If your version is lower than 3.0.03, please go...
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
If the machine is vibrating abnormally, please check the following two points: 1. Check the transportation screw If this is a new machine, please make sure the screw on the back...
Please keep speed at 200. The blade holder scale should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade s...
If you want to improve cutting results, please follow these tips: Check Wheel Position Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
Center Cutting is a function that positions the cutting area exactly in the center of the material. The cutting position is calculated based on the width and height values you ent...
To add a new model, send the full and accurate brand and model name (e.g., "Reeder S23 Pro Max," "Xiaomi Pad SE") in the support chat. If possible, include a clear picture of the d...
The print quality of customized photos is not related to the screen protector cutting machine. It mainly depends on the printer and its printing performance. If you requir...
The Mietubl MTB-CUT 180T Series screen protector cutting machines support connecting to a printer for printing customized phone back films. Please follow the operation video to co...
This video demonstrates how to restore the machine to its factory settings. Performing a factory reset will return the device to its original working state. Please note: Any app...
"If the machine remains stuck on the logo screen after powering on and cannot proceed to the next operation, reinstalling the system may resolve the issue. This video provides a st...
The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material. The thicker the material, the higher the blade holder scale...
"The top cover of the M288 machine is secured with pins. If the top cover comes off, you can follow the method shown in the video to properly lock the top cover back in place." htt...
"The top cover of the M288 machine is secured with pins. If the top cover comes off, you can follow the method shown in the video to properly lock the top cover back in place." htt...
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
