Showing 322 results
for
"cutting width"
MTB-CUT 180T
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material.
The thicker the material, the higher the blade holder scale...
MTB-CUT 180T
This issue is usually caused by the rollers not gripping the material properly, allowing it to shift during cutting.
Please check the following:
Ensure all rollers are positioned...
MTB-CUT 180T
"The recommended cutting parameters for back films are:
Material Size: 180mm width × 120mm height
Pressure: 300
Blade Holder Scale: 5
Speed: 200
These settings are suit...
MTB-CUT 180T
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films.
Recommended Solution
When cutting full back film, pl...
MTB-CUT 180T
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films.
Recommended Solution
When cutting full back film, pl...
MTB-CUT 180T
The cutting speed does not have a major impact on most cutting tasks.
In general:
👉 200 is the recommended default cutting speed.
You only need to reduce the cutting speed when...
MTB-CUT 180T
All of our screen protector cutting machines (Including: 180T / M188 / M288 ) support the counting and statistics function.
You can check the cutting and sales statistics by going...
MTB-CUT 180T
If you are using standard back film, please follow these steps:
Set the material size in settings according to your actual material (e.g., 180 × 120 mm)
Enable the &ldquo...
MTB-CUT 180T
A Full Back template refers to a full-wrap back film that covers:
The back of the phone
The side edges
The curved corners around the device
Compared with normal back films,...
MTB-CUT 180T
The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material.
The thicker the material, the higher the blade holder scale...
MTB-CUT 180T
The MTB-CUT 180T screen protector cutting machine supports a maximum cutting width of 228 mm,
which corresponds to screen protectors up to approximately 16 inches in size.
Notes:...
MTB-CUT 180T
Our screen protector cutting machine provides five built-in pressure preset slots.
You can rename these presets and save the pressure settings for your commonly used cutting mater...
MTB-CUT 180T
You can access your machine’s cutting activity from the Cutting Records section on the home page.
There, you will find the daily and 30-day cutting statistics.
If you req...
MTB-CUT 180T
This issue usually occurs when cutting full back film templates while the “Cut Center” option is enabled.
Solution
When cutting full back films, please disable the &l...
MTB-CUT 180T
In most cases, it is recommended to keep the cutting speed at the default value of 200.
This setting is suitable for most cutting materials.
The recommended blade pressure is: 30...
MTB-CUT 180T
"Our smart screen protector machine comes with a custom template option. You can easily create your own template by entering just a few parameters.
Steps:
On the main interface,...
MTB-CUT 180T
"This error usually means the cutting carriage (X-axis motor) is stuck or cannot find its home position.
- Step 1: Press and hold the power button for 20 seconds to restart the mac...
MTB-CUT 180T
Creating a cutting template is not simple it requires special software to convert it into a file format supported by the machine. For basic screen protectors, you can use the custo...
MTB-CUT 180T
If the sensor is not working, please follow these steps:
1. Check Auto-loading setting
Go to Settings and check if the “Auto-loading” option is disabled.
If it is disabled, plea...
MTB-CUT 180T
The correct material (paper) size setting is:
180 mm × 120 mm
Please make sure the material is placed in the correct direction before cutting.
Showing 121
to 140
of 322 results
