Showing 43 results
for
"default password"
MTB-CUT 180T
"You can change your password in two ways:
Change directly on the machine – Go to Home → My → Change Password, enter your current password, and set a new one.
Request technical...
MTB-CUT 180T
"On the home page, click the “Forget password” option and enter the email address you used during registration to reset your password.
https://osscdn.mietubl.com/images/20250813172...
MTB-CUT 180T
"On the login page, click “Forget password” and enter your email address to receive a verification code for resetting your password (see the example image below).
https://osscdn.mi...
MTB-CUT 180T
"The version test password feature is intended only for limited testing before a new version is officially released.
It does not always take effect, and the default password is usu...
MTB-CUT 180T
"You can set the Cutter App as the default startup app by following these steps:
Open the device System Settings.
Locate Cutter App (usually found under App Management or Defaul...
MTB-CUT 180T
The password for software/firmware upgrade is: 1212
MTB-CUT 180T
The Gear Ratio controls the relationship between motor movement and the actual cutting distance. It is a key parameter that directly affects cutting accuracy and scaling.
The defa...
MTB-CUT 180T
"The intelligent film cutting machine is easy to set up.
The standard settings include cutting pressure, cutting speed, blade holder scale, and material size.
Material size main...
MTB-CUT 180T
"The default cutting speed of the machine is 200. In most cases, keeping the default setting will deliver good cutting performance.
You only need to reduce the speed in special sit...
MTB-CUT 180T
"The intelligent film cutting machine is easy to set up.
The standard settings include cutting pressure, cutting speed, blade holder scale, and material size.
Material size main...
MTB-CUT 180T
If you encounter problems while configuring the machine, you can try using the following default settings, which work for most materials:
Recommended Default Settings
Speed: 20...
MTB-CUT 180T
"The intelligent film cutting machine is easy to set up.
The standard settings include cutting pressure, cutting speed, blade holder scale, and material size.
Material size mainl...
MTB-CUT 180T
"Here are some default setting ：material size is 180mm width × 120mm height.
Cutting pressure: 300
Cutting speed: 200
Blade holder scale: 5
These default settings are sui...
MTB-CUT 180T
"If you start the screen protector cutting machine but the Cutter app does not launch automatically, this may be because the device was recently reset and the Cutter app has not be...
MTB-CUT 180T
You can edit your registration information by following these steps:
Go to the “Mine” page on the machine.
From there, you can update your account information and c...
MTB-CUT 180T
The password for the software upgrade is 1212.
Please note that the software upgrade is intended for functional updates and does not necessarily include additional templates.
MTB-CUT 180T
How to connect the screen protector machine to a Canon / Epson printer?
Please follow these steps:
Go to: “Mine” → “APP version update” → &ldquo...
MTB-CUT 180T
This issue is usually caused by a faulty motherboard controlling the carriage.
It is recommended to contact your local distributor to obtain a replacement motherboard. Please refe...
MTB-CUT 180T
To connect an Epson printer, you need to update the machine APP first.
Steps
Go to:
Mine → APP Version Update → Test Version → Enter the update password: 202...
MTB-CUT 180T
"If the cutting machine stops halfway, it is usually due to incorrect material size or parameter settings. When the cutting carriage reaches the edge, it triggers the edge sensor,...
Showing 1
to 20
of 43 results
