This issue is usually caused by incorrect roller positioning, resulting in uneven pressure on the material and inconsistent cutting sizes. To adjust the roller position, press dow...
This issue is usually caused by a loose carriage, resulting in unstable cutting paths and improper round cutting. Please follow these steps: Refer to the instruction video and re...
"Incorrect cutting shapes are most likely caused by incorrect wheels positioning. When using the machine, please ensure that all wheels are pressing on the black strip, as shown in...
This issue is usually caused by incorrect roller positioning, resulting in uneven pressure on the material and inconsistent cutting sizes. To adjust the roller position, press dow...
"Uneven film widths after cutting are usually caused by incorrect wheel positioning. If the wheels are pressing on the smooth part, they cannot firmly hold the film, leading to inc...
If the camera lens cutout appears oval-shaped, it is likely caused by a loose carriage. Please follow these steps: Refer to the instructional video to refit the carriage onto the...
"If the cutting Car fails to stop properly when reaching the edge and produces a loud noise, it is likely due to an error in the Car’s limit positioning. You can replace specific p...
You can follow the video tutorial provided below to operate the MTB-CUT M288 intelligent cutting and pasting machine. The video demonstrates all the required steps for proper cutt...
MTB-CUT 180T Screen Protector Cutting Machine does not include UV curing function. If you need to perform UV curing operations, you will need to use a separate UV curing device, s...
The screen protector machine will automatically find the middle cutting position according to the material size setting. Adjust the material size setting to change the cutting rang...
The screen protector machine will automatically find the middle cutting position according to the material size setting. If you need to change the cutting range, adjust the materia...
The Cut Centered option is used to position the cutting area exactly in the center of the material size you set. For example, if your material size is set to 180mm (width) ×...
