You can follow the video tutorial provided below to operate the MTB-CUT M288 intelligent cutting and pasting machine. The video demonstrates all the required steps for proper cutt...
PrinterServer is the software that allows the screen protector cutting machine to work with different printer brands and models. It must be installed on a Windows computer. You c...
If your touch screen is not responding properly, please check the following: 1. Confirm you are using the original power adapter The original adapter should be 24V / 2.7A. Usi...
"If you want to change the language, follow these steps: Change the language inside the Cutter App Open Cutter App. Go to the Settings menu. Find the Language option and s...
"If your machine stays in the “Status Checking” state for a long time, it may be caused by network delays or communication errors. Please try the following steps: Restart the machi...
"You can set the Cutter App as the default startup app by following these steps: Open the device System Settings. Locate Cutter App (usually found under App Management or Defaul...
"To create a custom rear film, you need to connect your screen protector cutting machine to a printer. Steps: Connect the Devices It’s recommended to use Epson or Canon printer...
"You can set the Cutter APP as the Home App in the system settings. Once this is set, the machine will automatically launch the Cutter App every time it’s powered on. https://mi...
"First, please check the barcode on the back of your machine: For devices with a barcode format MT00XXXXXXXXXXX, the machine supports connection to Canon G580 / G680 and Epson L325...
When you first receive the machine, you must remove the transport-locking screw located on the back of the device to prevent damage to the blade carriage. During normal daily us...
This issue is usually caused by the cutting carriage becoming loose from the guide rail. When the carriage is not firmly fixed, the blade cannot follow an accurate circular path, r...
The “Reconnection” message means that the screen cannot establish a proper connection with the mainboard. This issue is typically caused by a loose or faulty screen-to...
This issue is usually caused by the cutting carriage becoming loose from the guide rail. When the carriage is not firmly fixed, the blade cannot follow an accurate circular path, r...
Please first confirm the specific issue you are facing: 1. If the blade holder does not go down during cutting This is usually caused by a mainboard malfunction. In this case, t...
If the camera lens cutout appears oval-shaped, it is likely caused by a loose carriage. Please follow these steps: Refer to the instructional video to refit the carriage onto the...
This issue is usually caused by corrupted cached data in the system. Please follow the steps below: Clear the APP cache Follow the method shown in the video to clear the Cutter...
When the machine beeps with a repeated “bip bip” sound and fails to start cutting, it usually means that the X-axis or Y-axis cannot operate normally. Common causes include a stuc...
There are three possible causes for this error: 1. The template width exceeds the maximum supported size The maximum cutting width of the screen protector machine is 228 mm. If...
This issue is usually caused by corrupted cached data in the system（Please note that the following method only applies when the model list is not displayed at all.）. Please foll...
If the machine displays a “Time Out” error during film cutting, please follow the steps below: 1. Check whether the motherboard is connected On the machine, go to:...
