Showing 62 results
for
"check version"
MTB-CUT 180T
"The machine’s software version depends on the release of new features.
As of October 2025, the latest APP version is 3.0.05.
Tips:
You can check or update your version by foll...
MTB-CUT 180T
"The Word Cutting feature is only available in version 3.0.03 and above.
You can check your current app version by going to "About This Device".
https://osscdn.mietubl.com/ima...
MTB-CUT 180T
"The timing of version updates depends on the release of new features and does not follow a fixed schedule.
You can go to ""My"" → ""APP Version Update"" to check whether your curr...
MTB-CUT 180T
"The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device"".
https://osscdn.mietubl.com/images/202505191638...
MTB-CUT 180T
This happens because the APP version was rolled back during the factory reset.
When the machine is reset, the system returns to the earliest APP version, and many new models added...
MTB-CUT 180T
"English Version
If you notice white edges when applying a screen protector using the MTB-CUT M288, the issue may be caused by the following reasons:
Template too large
It’s re...
MTB-CUT 180T
"The version test password feature is intended only for limited testing before a new version is officially released.
It does not always take effect, and the default password is usu...
MTB-CUT 180T
"By default, the Mietubl screen protector cutting machine does not support direct PC connection.
The machine runs on an independent embedded operating system, and all templates and...
MTB-CUT 180T
"By default, the Mietubl screen protector cutting machine does not support direct PC or laptop connection.
The machine runs on an independent embedded operating system, and all tem...
MTB-CUT 180T
"Currently, the MTB-CUT 180T screen protector cutting machine does not include a mobile app.
All operations — such as template selection, cutting setup, and data updates — are perf...
MTB-CUT 180T
"If you experience unresponsive touch or system crashes, it may be necessary to replace the machine’s screen.
This video provides a step-by-step guide on how to replace the screen...
MTB-CUT 180T
The screen protector machine’s app updates are one-way.
This means:
➡️ Once the app is updated to a higher version, it cannot be rolled back to a lower version.
Rollback o...
MTB-CUT M288
"To update the firmware on the M288 for fixing issues like UV film white edges, follow these steps carefully:
Connect to a stable network
Ensure the M288 is connected to a reliabl...
MTB-CUT M188
A “Time Out” message usually means that there is a communication failure between the screen and the mainboard. This can be caused by:
Loose or Damaged Screen Cable
Op...
MTB-CUT 180T
"If your machine stays in the “Status Checking” state for a long time, it may be caused by network delays or communication errors. Please try the following steps:
Restart the machi...
MTB-CUT 180T
"If the cutting process cannot start, please follow these steps to troubleshoot:
Restart the machine: Power off and then restart the device.
Check carriage reset: When the machi...
MTB-CUT 180T
"If the machine is continuously beeping and not working properly, please try the following steps:
Force Restart: Press and hold the power button for 20 seconds to force the machine...
MTB-CUT 180T
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT 180T
When the machine beeps with a repeated “bip bip” sound and fails to start cutting, it usually means that the X-axis or Y-axis cannot operate normally.
Common causes include a stuc...
MTB-CUT M288
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
Showing 1
to 20
of 62 results
