The correct Gear Ratio settings are: X-axis: 2000 Y-axis: 2000 Please do NOT modify the Gear Ratio settings. Incorrect Gear Ratio values may cause the machine to malfun...
"This can be caused by several issues: - Incorrect Power Supply: Ensure you are using the original power adapter. An incorrect adapter can cause insufficient power. - Blade Pressu...
Center Cutting is a function that positions the cutting area exactly in the center of the material. The cutting position is calculated based on the width and height values you ent...
"This is caused by an incorrect ""Material Size"" setting. For custom cuts, you must first define the dimensions of the film you are using (e.g., 300x200 mm). The machine uses this...
Please go to: Mine → Data Update to manually update the template data. In fact, as long as your machine is connected to the internet, it will automatically perform...
"This issue can be caused by several reasons: Low Cutting Pressure Check your cutting pressure settings. If the pressure is too low, the blade holder won’t drop enough to tou...
"The machine is equipped with X-axis and Y-axis motors. The X-axis motor is responsible for controlling the horizontal (left-right) movement of the cutting Car. If the X-axis belt...
"The rollers are primarily responsible for controlling the forward and backward movement of the material. Please note: Pay close attention to the position of the black pads on the...
This video demonstrates how to restore the machine to its factory settings. Performing a factory reset will return the device to its original working state. Please note: Any app...
"If the machine is unable to cut screen protector materials properly, please first try the following steps: Replace the blade and blade holder with new ones. Set the cutting pre...
"If you start the screen protector cutting machine but the Cutter app does not launch automatically, this may be because the device was recently reset and the Cutter app has not be...
"We periodically release updates for the machine's app to improve performance and functionality. The password required to perform the app upgrade is ""1212"". Please note: App...
"We provide a local data editing feature to help customers meet specific size requirements. You can modify existing templates on the machine — including scaling up or down — based...
"If the 180T screen protector cutting machine displays a “Reconnection” message after startup, it is likely that there is an issue with the system firmware. You can resolve this by...
"By accessing the error information interface, we can quickly determine whether the device is functioning properly. You can send the error details to our technical team to help the...
The screen protector machine will automatically find the middle cutting position according to the material size setting. Adjust the material size setting to change the cutting rang...
"If the MTB-CUT M288 intelligent film cutting and pasting machine fails to automatically secure the screen protector or if the vacuum pump does not start, it may indicate a vacuum...
The screen protector machine will automatically find the middle cutting position according to the material size setting. If you need to change the cutting range, adjust the materia...
Since the MTB-CUT TPU screen protector machine has no handle, you can quickly press the power button, and the material will be automatically pushed out.
" There are a certain list of the printer models that are supported, and Canon G580, G680 is mainly recommended. Recommended Canon G58...
