Showing 62 results
for
"intended use"
MTB-CUT 180T
"When cutting full-wrap back films, please disable the “Center Cut” option on the cutting page.
This is because full-wrap back films have larger dimensions,
so you can either use...
MTB-CUT 180T
"If your machine stays in the “Status Checking” state for a long time, it may be caused by network delays or communication errors. Please try the following steps:
Restart the machi...
MTB-CUT 180T
"When cutting back films, you need to consider both the pattern position and the cutting range. You can adjust these by setting the material size and enabling or disabling center c...
MTB-CUT 180T
"The privacy angle setting is mainly used for HD privacy cutting materials. Since screen structures and display effects vary across devices, there is no universal angle setting.
Yo...
MTB-CUT 180T
If the cut size is slightly larger, you can try the following methods:
Choose templates labeled “with case”, which are slightly smaller to fit phone cases
Use the bui...
MTB-CUT 180T
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material.
Thicker or harder materials require a higher blade size, while thi...
MTB-CUT 180T
If you want to create a new custom template, you can use the machine’s built-in Custom Template function.
This feature allows you to manually enter:
Width
Height
Corner...
MTB-CUT 180T
"English Version
To ensure that the machine can still operate in poor network conditions, we use a combination of offline and cloud-based data processing.
If your network is conne...
MTB-CUT 180T
Using the machine is very simple.
After completing the account registration, you only need to:
Select the required phone model/template on the machine
Place the cutting materi...
MTB-CUT 180T
"When the film bulges during cutting, it is usually caused by the following reasons:
Blade holder depth set too high – Excessive cutting depth can cause uneven stress on the materi...
MTB-CUT 180T
In most cases, it is recommended to keep the cutting speed at the default value of 200.
This setting is suitable for most cutting materials.
The recommended blade pressure is: 30...
MTB-CUT 180T
If the network connection is unstable while downloading model data/templates, please try the following:
Solution
Connect the machine to another Wi-Fi network
Or use a mobile hot...
MTB-CUT 180T
"You can report an issue in the following ways:
Use the search bar in the current window to type in keywords related to your issue and see if there’s already a solution available....
MTB-CUT 180T
If you want to improve cutting results, please follow these tips:
Check Wheel Position
Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
MTB-CUT 180T
This issue is usually caused by a mismatch between the material size settings and the template being used.
When cutting full back film, the cutting area is larger than standard te...
MTB-CUT 180T Pro
The operation method for the MTB-CUT 180T Pro is the same as the MTB-CUT 180T.
The main differences between the two models are:
Maximum cutting size
Additional functions and f...
MTB-CUT 180T
"To create a custom rear film, you need to connect your screen protector cutting machine to a printer.
Steps:
Connect the Devices
It’s recommended to use Epson or Canon printer...
MTB-CUT 180T
"Unexpected interruptions may lead to the loss of device firmware. This video provides step-by-step instructions on how to generate the firmware for your device and reinstall the s...
MTB-CUT 180T
"If you experience unresponsive touch or system crashes, it may be necessary to replace the machine’s screen.
This video provides a step-by-step guide on how to replace the screen...
MTB-CUT 180T
"The rubber cutting mat strip located beneath the blade serves to prevent blade wear and extend the blade’s service life.
However, after prolonged use, the surface of the mat strip...
Showing 21
to 40
of 62 results
