There are three possible causes for this error: 1. The template width exceeds the maximum supported size The maximum cutting width of the screen protector machine is 228 mm. If...
The Cut Centered option is used to position the cutting area exactly in the center of the material size you set. For example, if your material size is set to 180mm (width) ×...
Yes, the machine supports simple modifications to existing templates, such as expanding or reducing the size or opening holes.
In most cases, you can keep the cutting speed at the default value of 200. This setting works well for the majority of materials. When to reduce the speed You should lower the...
"We offer multiple template variations for the same phone model to meet different user requirements. You can distinguish them by their names, which indicate their intended usage sc...
The correct material (paper) size setting is: 180 mm × 120 mm Please make sure the material is placed in the correct direction before cutting.
"Here are some default setting ：material size is 180mm width × 120mm height. Cutting pressure: 300 Cutting speed: 200 Blade holder scale: 5 These default settings are sui...
"The recommended cutting parameters for back films are: Material Size: 180mm width × 120mm height Pressure: 300 Blade Holder Scale: 5 Speed: 200 These settings are suit...
If you want to create a new custom template, you can use the machine’s built-in Custom Template function. This feature allows you to manually enter: Width Height Corner...
The operation method for the MTB-CUT 180T Pro is the same as the MTB-CUT 180T. The main differences between the two models are: Maximum cutting size Additional functions and f...
Center Cutting is a function that positions the cutting area exactly in the center of the material. The cutting position is calculated based on the width and height values you ent...
The Blade Holder Scale depends on the thickness of the material. For most TPU screen protector materials, the following settings are recommended: Blade Size: 5 Pressure: 300 &n...
The cutting speed does not have a major impact on most cutting tasks. In general: 👉 200 is the recommended default cutting speed. You only need to reduce the cutting speed when...
"We provide a local data editing feature to help customers meet specific size requirements. You can modify existing templates on the machine — including scaling up or down — based...
If the machine is operating slowly, it is usually because the cutting speed is set too low. You can adjust the setting by following these steps: Open the Settings page; Find the...
Large-size screen protectors such as iPad and laptop films have longer cutting paths. During long-distance cutting, the material may slightly shift due to the blade pressure, whic...
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
The Cut Centered option is useful when you want the cutting area to be positioned exactly in the center of your material. For example, this is especially helpful when cutting back...
