Showing 245 results
for
"cutting materials"
MTB-CUT 180T
"If the machine shows an “Insufficient Cutting Times” message, please send your machine username to the dealer who sold you the machine.
They will add more cutting times for your a...
MTB-CUT 180T
"A knocking sound from the machine can be caused by the following reasons and can be resolved as follows:
Transport screws not removed (for new machines)
New machines are shippe...
MTB-CUT 180T
If you are using standard back film, please follow these steps:
Set the material size in settings according to your actual material (e.g., 180 × 120 mm)
Enable the &ldquo...
MTB-CUT 180T
"PrinterServer is mainly used to connect the smart screen protector cutting machine with a printer to enable personalized pattern printing and customization.
You can follow the ste...
MTB-CUT 180T
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device
If your version is lower than 3.0.03, please go...
MTB-CUT 180T
"If the cutting process cannot start, please follow these steps to troubleshoot:
Restart the machine: Power off and then restart the device.
Check carriage reset: When the machi...
MTB-CUT 180T
If the screen protector cutting machine cannot load phone models and the cutting page appears blank, it is usually caused by a language setting issue or corrupted software data.
S...
MTB-CUT 180T
Under normal conditions, we recommend replacing the blade after approximately: 300 cuts
However, this is only a recommended value.
The actual blade lifespan may increase or decre...
MTB-CUT 180T Pro
The operation method for the MTB-CUT 180T Pro is the same as the MTB-CUT 180T.
The main differences between the two models are:
Maximum cutting size
Additional functions and f...
MTB-CUT 180T
"This issue is usually caused by the template being too large.
Try to disable the “Cut Center” option in the cutting page.
https://mietublweb.oss-cn-hongkong.aliyuncs.com/imag...
MTB-CUT 180T
"When the sensor malfunctions, the machine may fail to detect or automatically load the cutting material. You can try the following two approaches:
Replace the Sensor
If the senso...
MTB-CUT 180T
"
Sorry, the current Mietubl screen protector cutting machine does not support direct connection to a mobile app.
All operations — including model selection, data updates, and de...
MTB-CUT 180T
"This issue can be caused by several reasons:
Low Cutting Pressure
Check your cutting pressure settings.
If the pressure is too low, the blade holder won’t drop enough to tou...
MTB-CUT 180T
"By default, the Mietubl screen protector cutting machine does not support direct PC connection.
The machine runs on an independent embedded operating system, and all templates and...
MTB-CUT 180T
"By default, the Mietubl screen protector cutting machine does not support direct PC or laptop connection.
The machine runs on an independent embedded operating system, and all tem...
MTB-CUT 180T
"Loosening of the car from the guide rail is one of the main causes of cutting distortion.
If such an issue occurs, it is necessary to adjust the clearance between the car and the...
MTB-CUT 180T
"This video provides a step-by-step guide on how to repair the cutting Car.
Please note:
When reinstalling the Car, pay close attention to the clearance between the Car and the gu...
MTB-CUT M288
The screen protector machine will automatically find the middle cutting position according to the material size setting. Adjust the material size setting to change the cutting rang...
MTB-CUT M288
Sorry, the cutting machine does not have an app for Android or iOS. Manual placement of cutting material makes the app unnecessary.
MTB-CUT M288
"If the MTB-CUT M288 intelligent film cutting and pasting machine displays a ""Reconnection"" message at startup or if the cutting Car fails to cut properly, the mainboard may be f...
Showing 81
to 100
of 245 results
