Showing 107 results
for
"blade settings"
MTB-CUT 180T
"If the Car moves after you initiate cutting, but the blade holder does not drop, this issue may be caused by one of the following reasons:
Insufficient power supply – Please verif...
MTB-CUT 180T
When you first receive the machine, you must remove the transport-locking screw located on the back of the device to prevent damage to the blade carriage.
During normal daily us...
MTB-CUT 180T
If you encounter problems while configuring the machine, you can try using the following default settings, which work for most materials:
Recommended Default Settings
Speed: 20...
MTB-CUT 180T
"Here are some default setting ：material size is 180mm width × 120mm height.
Cutting pressure: 300
Cutting speed: 200
Blade holder scale: 5
These default settings are sui...
MTB-CUT 180T
"This issue can be caused by several reasons:
Low Cutting Pressure
Check your cutting pressure settings.
If the pressure is too low, the blade holder won’t drop enough to tou...
MTB-CUT 180T
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material.
The thicker the material, the higher the blade holder scale...
MTB-CUT 180T
"The intelligent film cutting machine is easy to set up.
The standard settings include cutting pressure, cutting speed, blade holder scale, and material size.
Material size main...
MTB-CUT 180T
It is generally recommended to replace the blade after around 300 cuts.
The actual replacement frequency may vary depending on material type and usage. If cutting quality...
MTB-CUT 180T
"This can be caused by several issues:
- Incorrect Power Supply: Ensure you are using the original power adapter. An incorrect adapter can cause insufficient power.
- Blade Pressu...
MTB-CUT 180T
Please first confirm the specific issue you are facing:
1. If the blade holder does not go down during cutting
This is usually caused by a mainboard malfunction.
In this case, t...
MTB-CUT 180T
"The default parameters of the screen protector cutting machine — blade holder scale 5 and cutting pressure 300g — are suitable for most materials, including HD clear film.
If the...
MTB-CUT 180T
"The recommended cutting parameters for UV materials on the screen protector cutting machine are:
Blade holder scale: 6, Cutting pressure: 380.
If the machine cannot cut properl...
MTB-CUT 180T
Installing a UV screen protector is different from applying regular screen protector materials.
UV protectors require an additional curing step to harden the surface.
Steps &...
MTB-CUT 180T
In most cases, it is recommended to keep the cutting speed at the default value of 200.
This setting is suitable for most cutting materials.
The recommended blade pressure is: 30...
MTB-CUT 180T
"If the machine is unable to cut screen protector materials properly, please first try the following steps:
Replace the blade and blade holder with new ones.
Set the cutting pre...
MTB-CUT M188
"In the MTB-CUT M188 screen protector cutting machine, the rubber strip at the bottom of the cutting module is designed to protect the cutting blade and extend the lifespan of both...
MTB-CUT 180T
When the machine beeps with a repeated “bip bip” sound and fails to start cutting, it usually means that the X-axis or Y-axis cannot operate normally.
Common causes include a stuc...
MTB-CUT 180T
If you are using standard back film, please follow these steps:
Set the material size in settings according to your actual material (e.g., 180 × 120 mm)
Enable the &ldquo...
MTB-CUT 180T
"If you want to change the language, follow these steps:
Change the language inside the Cutter App
Open Cutter App.
Go to the Settings menu.
Find the Language option and s...
MTB-CUT 180T
Our screen protector cutting machine provides five built-in pressure preset slots.
You can rename these presets and save the pressure settings for your commonly used cutting mater...
Showing 21
to 40
of 107 results
