The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
Please keep speed at 200. The blade holder scale should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade s...
This issue may be caused by: The material sensor being blocked A mainboard malfunction Please try the following steps: Go to Settings Disable the “Auto Loading&rdq...
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
We offer five types of raw materials for the screen protector machine: 1. HD Clear Films: Provides a clear viewing experience with a long-lasting anti-fingerprint coating. Minor sc...
"A slow APP startup is usually caused by excessive cached data slowing down performance. You can try the following steps: Clear the Cache: Follow the steps shown in the video to go...
This issue is usually caused by corrupted cached data in the system. Please follow the steps below: Clear the APP cache Follow the method shown in the video to clear the Cutter...
This issue is usually caused by corrupted cached data in the system（Please note that the following method only applies when the model list is not displayed at all.）. Please foll...
Yes, the screen protector machine can cut PET material. However, you may need to adjust the machine settings, and keep in mind that PET material is more likely to wear out the cutt...
If you are using standard back film, please follow these steps: Set the material size in settings according to your actual material (e.g., 180 × 120 mm) Enable the &ldquo...
If you are using standard back film, please follow these steps: Set the material size in settings according to your actual material (e.g., 180 × 120 mm) Enable the &ldquo...
If you are using standard back film, please follow these steps: Set the material size in settings according to your actual material (e.g., 180 × 120 mm) Enable the &ldquo...
"If the tablet screen protector is not cutting well, it is usually because the roller is not providing enough pressure. You can try the following solutions: Lift the gear at the ba...
"Cutting misalignment is usually caused by: Center Cutting Not Enabled: Make sure the “Center Cutting” option is enabled on the cutting page so the machine automatically positions...
Laptop screen protectors have a much longer cutting path, and during long-distance cutting, the material may experience slight deviation due to blade pressure. This can cause inacc...
You can follow the video tutorial provided below to operate the MTB-CUT M288 intelligent cutting and pasting machine. The video demonstrates all the required steps for proper cutt...
Large-size screen protectors such as iPad and laptop films have longer cutting paths. During long-distance cutting, the material may slightly shift due to the blade pressure, whic...
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
The correct cutting parameters depend on the materials being used. Here are some recommended settings for common materials: Material | Back Film | Four Layer Soft Film | Explosion-...
In most cases, you can keep the cutting speed at the default value of 200. This setting works well for the majority of materials. When to reduce the speed You should lower the...
