Showing 105 results
for
"first time use"
MTB-CUT 180T
"This is caused by an incorrect ""Material Size"" setting. For custom cuts, you must first define the dimensions of the film you are using (e.g., 300x200 mm). The machine uses this...
MTB-CUT 180T
If the screen protector cutting machine cannot load phone models and the cutting page appears blank, it is usually caused by a language setting issue or corrupted software data.
S...
MTB-CUT 180T
If the screen protector cutting machine cannot load phone models and the cutting page appears blank, it is usually caused by a language setting issue or corrupted software data.
S...
MTB-CUT 180T
The clarity of the printed photo mainly depends on:
The resolution and quality of the original image
The printer and its print quality/settings
The screen protector cutting...
MTB-CUT 180T
If no models are displayed after updating the machine and you only see “K_product”, this is usually because the APP data loading process was interrupted after the upgra...
MTB-CUT 180T
"If the machine is unable to cut screen protector materials properly, please first try the following steps:
Replace the blade and blade holder with new ones.
Set the cutting pre...
MTB-CUT M688/M288
If the machine is making a constant or continuous noise, please try a hard reset first:
Press and hold the power button for 20 seconds to reset the machine.
If the noise continue...
MTB-CUT M688/M288
If the machine displays “Device is Disabled” while you are using it, please first check whether the machine is connected to the internet.
If the machine is already onl...
MTB-CUT 180T
Please first confirm the specific issue you are facing:
1. If the blade holder does not go down during cutting
This is usually caused by a mainboard malfunction.
In this case, t...
MTB-CUT 180T
Under normal conditions, we recommend replacing the blade after approximately: 300 cuts
However, this is only a recommended value.
The actual blade lifespan may increase or decre...
MTB-CUT 180T Pro
Please keep speed at 200.
The blade holder scale should be adjusted based on the thickness and hardness of the film material.
Thicker or harder materials require a higher blade s...
MTB-CUT 180T
"English Version
If you notice white edges when applying a screen protector using the MTB-CUT M288, the issue may be caused by the following reasons:
Template too large
It’s re...
MTB-CUT 180T
"Prolonged use of excessively high blade holder settings and cutting pressure may lead to a decline in the precision of the blade holder, resulting in the inability to properly cut...
MTB-CUT 180T
The power adapter specifications for the MTB-CUT 180T Screen Protector Cutting Machine are:
Input: 100–240V~, 50/60Hz
Output: 24V / 2A
Please use a power adapter t...
MTB-CUT M688/M288
"To update the firmware on the M288 for fixing issues like UV film white edges, follow these steps carefully:
Connect to a stable network
Ensure the M288 is connected to a reliabl...
MTB-CUT 180T
If the cutting model is in the wrong direction (e.g., mirrored, upside down, or rotated incorrectly), you can adjust it using the mirror and rotation functions:
Use X/Y Axis Mirro...
MTB-CUT 180T
If the screen turns off automatically abnormally, it may be caused by a short circuit or internal wiring issue.
Please click the WhatsApp button below and send the following to ou...
MTB-CUT 180T
Creating a cutting template is not simple it requires special software to convert it into a file format supported by the machine. For basic screen protectors, you can use the custo...
MTB-CUT 180T
Currently, our screen protector cutting machines do not support LAN connection to a laptop.
The machines are designed to operate based on a cloud database system, and do not requi...
MTB-CUT 180T
No, the machine uses a blade to cut, which makes it safe, quiet, and pollution-free ideal for use in locations like shopping malls or at home.
Showing 41
to 60
of 105 results
