There are three possible causes for this error: 1. The template width exceeds the maximum supported size The maximum cutting width of the screen protector machine is 228 mm. If...
The Cut Centered option is used to position the cutting area exactly in the center of the material size you set. For example, if your material size is set to 180mm (width) ×...
"If you want to change the language, follow these steps: Change the language inside the Cutter App Open Cutter App. Go to the Settings menu. Find the Language option and s...
For most cutting tasks, we recommend using the machine’s default settings: 👉 Cutting Speed: 200 👉 Blade Pressure: 300 These settings are suitable for the majority of scr...
Our screen protector cutting machine provides five built-in pressure preset slots. You can rename these presets and save the pressure settings for your commonly used cutting mater...
"The recommended cutting parameters for back films are: Material Size: 180mm width × 120mm height Pressure: 300 Blade Holder Scale: 5 Speed: 200 These settings are suit...
Center Cutting is a function that positions the cutting area exactly in the center of the material. The cutting position is calculated based on the width and height values you ent...
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
The Cut Centered option is useful when you want the cutting area to be positioned exactly in the center of your material. For example, this is especially helpful when cutting back...
If the screen protector cutting machine fails to load phone models correctly, it may be caused by incorrect language settings or app data issues. Please follow the instruction vid...
This issue is usually caused by incorrect language settings or app data problems, resulting in the product page not displaying properly. Please follow the instruction video to cle...
"If the sensor is not working, please check whether it has been disabled in the settings. Go to Settings, find the option “Material Auto-feeding”, and make sure it is turned ON....
"To restore the machine settings, follow these steps: Restart the device As the machine is starting up, quickly tap the blue icon 10 times Select "Factory Reset" Please no...
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material. The thicker the material, the higher the blade holder scale...
"The settings button is only available when the device is logged in. You can log in to your account again to find this button. If, for some reason, you cannot log in successfull...
"You can set the Cutter App as the default startup app by following these steps: Open the device System Settings. Locate Cutter App (usually found under App Management or Defaul...
The correct Gear Ratio settings are: X-axis: 2000 Y-axis: 2000 Please do NOT modify the Gear Ratio settings. Incorrect Gear Ratio values may cause the machine to malfun...
The clarity of the printed photo mainly depends on: The resolution and quality of the original image The printer and its print quality/settings The screen protector cutting...
This video demonstrates how to restore the machine to its factory settings. Performing a factory reset will return the device to its original working state. Please note: Any app...
