Showing 59 results
for
"larger size"
MTB-CUT 180T
The Mietubl screen protector cutting machine supports both Canon and Epson printers.
Among these, Canon G580 / G680 are highly recommended for best compatibility and print quality...
MTB-CUT 180T
The MTB-CUT 180T screen protector cutting machine supports a maximum cutting width of 228 mm,
which corresponds to screen protectors up to approximately 16 inches in size.
Notes:...
MTB-CUT 180T
When cutting full-screen back films, please disable the "Cut Center" option on the cutting page.
Additionally, ensure that the material size is set to 180mm x 120mm.
Since the ful...
MTB-CUT 180T
"When cutting full-wrap back films, please disable the “Center Cut” option on the cutting page.
This is because full-wrap back films have larger dimensions,
so you can either use...
MTB-CUT 180T
A Full Back template refers to a full-wrap back film that covers:
The back of the phone
The side edges
The curved corners around the device
Compared with normal back films,...
MTB-CUT 180T
The MTB-CUT 180T supports a maximum cutting size of 16 inches, suitable for mobile phones, tablets, and some laptops.
If a larger cutting size is required, you can choose...
MTB-CUT 180T
"When cutting back films, you need to consider both the pattern position and the cutting range. You can adjust these by setting the material size and enabling or disabling center c...
MTB-CUT 180T
If the cut size is slightly larger, you can try the following methods:
Choose templates labeled “with case”, which are slightly smaller to fit phone cases
Use the bui...
MTB-CUT 180T
This issue is usually caused by a mismatch between the material size settings and the template being used.
When cutting full back film, the cutting area is larger than standard te...
MTB-CUT 180T
This issue is usually caused by a mismatch between the material size settings and the template being used.
When cutting full back film, the cutting area is larger than standard te...
MTB-CUT 180T
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material.
Thicker or harder materials require a higher blade size, while thi...
MTB-CUT 180T
"Solution:
Mietubl’s screen protector cutting machines come with a built-in data editing function, which allows you to modify and resize existing templates according to your requir...
MTB-CUT 180T
You can adjust the cutting location by modifying the Material Size and enabling or disabling the Cut Center function.
Here’s how it works:
When “Cut Center” is...
MTB-CUT 180T
The Cut Centered option is used to position the cutting area exactly in the center of the material size you set.
For example, if your material size is set to 180mm (width) ×...
MTB-CUT 180T
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material.
Thicker or harder materials require a higher blade size, while thi...
MTB-CUT 180T Pro
Please keep speed at 200.
The blade holder scale should be adjusted based on the thickness and hardness of the film material.
Thicker or harder materials require a higher blade s...
MTB-CUT 180T
"The recommended cutting parameters for back films are:
Material Size: 180mm width × 120mm height
Pressure: 300
Blade Holder Scale: 5
Speed: 200
These settings are suit...
MTB-CUT 180T
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films.
Recommended Solution
When cutting full back film, pl...
MTB-CUT 180T
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films.
Recommended Solution
When cutting full back film, pl...
MTB-CUT 180T
If you are using standard back film, please follow these steps:
Set the material size in settings according to your actual material (e.g., 180 × 120 mm)
Enable the &ldquo...
Showing 1
to 20
of 59 results
