Large-size screen protectors such as iPad and laptop films have longer cutting paths. During long-distance cutting, the material may slightly shift due to the blade pressure, whic...
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
This issue is usually caused by the rollers not gripping the material properly, allowing it to shift during cutting. Please check the following: Ensure all rollers are positioned...
"The rollers are primarily responsible for controlling the forward and backward movement of the material. Please note: Pay close attention to the position of the black pads on the...
The cutting speed does not have a major impact on most cutting tasks. In general: 👉 200 is the recommended default cutting speed. You only need to reduce the cutting speed when...
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material. The thicker the material, the higher the blade holder scale...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size mainl...
"There are various material sizes available on the market. In the M188 screen protector cutting machine, you can set custom material sizes to ensure that the cutting range is accur...
You can adjust the cutting location by modifying the Material Size and enabling or disabling the Cut Center function. Here’s how it works: When “Cut Center” is...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
The material size setting depends on the actual material you are using. By default, the machine is set to: 180 mm (width) × 120 mm (height) Please pay attention to the o...
"The material size setting depends on the type of material you are using. Mietubl's standard material size is 180mm (width) x 120mm (height). You can configure your machine accord...
"When cutting back films, you need to consider both the pattern position and the cutting range. You can adjust these by setting the material size and enabling or disabling center c...
"Here are some default setting ：material size is 180mm width × 120mm height. Cutting pressure: 300 Cutting speed: 200 Blade holder scale: 5 These default settings are sui...
If you want to improve cutting results, please follow these tips: Check Wheel Position Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
Center Cutting is a function that positions the cutting area exactly in the center of the material. The cutting position is calculated based on the width and height values you ent...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
When placing the cutting material, please follow these guidelines: Place the material on the right side of the machine’s platform. Make sure the material is completely flat...
