Yes. The MTB-CUT 180T Screen Protector Machine can cut various types of screen protector materials. The maximum supported cutting thickness is 0.7 mm, which fully covers a...
If you want to improve cutting results, please follow these tips: Check Wheel Position Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
We offer five types of raw materials for the screen protector machine: 1. HD Clear Films: Provides a clear viewing experience with a long-lasting anti-fingerprint coating. Minor sc...
In most cases, you can keep the cutting speed at the default value of 200. This setting works well for the majority of materials. When to reduce the speed You should lower the...
You can adjust the cutting location by modifying the Material Size and enabling or disabling the Cut Center function. Here’s how it works: When “Cut Center” is...
The correct cutting parameters depend on the materials being used. Here are some recommended settings for common materials: Material | Back Film | Four Layer Soft Film | Explosion-...
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material. The thicker the material, the higher the blade holder scale...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size mainl...
This issue is usually caused by the Blade Holder scale being set too high. Please try to reduce the Blade Holder scale setting. Important Note Pay attention to the blade exposur...
"Here are some default setting ：material size is 180mm width × 120mm height. Cutting pressure: 300 Cutting speed: 200 Blade holder scale: 5 These default settings are sui...
You can follow the video tutorial provided below to operate the MTB-CUT M288 intelligent cutting and pasting machine. The video demonstrates all the required steps for proper cutt...
No, our screen protector cutting machine has no limits on the number of films you can cut. You are free to use materials from any supplier. Burn%20the%20system%20into%20Micro%20SD%...
"When cutting full-wrap back films, please disable the “Center Cut” option on the cutting page. This is because full-wrap back films have larger dimensions, so you can either use...
"When cutting back films, you need to consider both the pattern position and the cutting range. You can adjust these by setting the material size and enabling or disabling center c...
"The recommended cutting parameters for back films are: Material Size: 180mm width × 120mm height Pressure: 300 Blade Holder Scale: 5 Speed: 200 These settings are suit...
Center Cutting is a function that positions the cutting area exactly in the center of the material. The cutting position is calculated based on the width and height values you ent...
A Full Back template refers to a full-wrap back film that covers: The back of the phone The side edges The curved corners around the device Compared with normal back films,...
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
We provide a variety of cutting materials such as HD clear, matte, privacy, and anti-blue-ray films. Prices vary depending on the material and functionality, but all options are ge...
