Showing 242 results
for
"cutting range"
MTB-CUT 180T
"The rubber cutting mat strip located beneath the blade serves to prevent blade wear and extend the blade’s service life.
However, after prolonged use, the surface of the mat strip...
MTB-CUT 180T
"If the machine is unable to cut screen protector materials properly, please first try the following steps:
Replace the blade and blade holder with new ones.
Set the cutting pre...
MTB-CUT M288
You can follow the video tutorial provided below to operate the MTB-CUT M288 intelligent cutting and pasting machine.
The video demonstrates all the required steps for proper cutt...
MTB-CUT 180T
The Cut Centered option is useful when you want the cutting area to be positioned exactly in the center of your material.
For example, this is especially helpful when cutting back...
MTB-CUT 180T
If you discover a size cutting problem during cutting, please send us the following information:
The phone’s System Information page
The corresponding cutting template/mode...
MTB-CUT 180T
"Cutting misalignment is usually caused by:
Center Cutting Not Enabled: Make sure the “Center Cutting” option is enabled on the cutting page so the machine automatically positions...
MTB-CUT 180T
When you say “wrong cutting”, we need more specific information to provide the correct solution.
Please confirm whether you selected the correct phone model/template...
MTB-CUT 180T
"If the Car moves after you initiate cutting, but the blade holder does not drop, this issue may be caused by one of the following reasons:
Insufficient power supply – Please verif...
MTB-CUT 180T
You can adjust the cutting location by modifying the Material Size and enabling or disabling the Cut Center function.
Here’s how it works:
When “Cut Center” is...
MTB-CUT 180T
Laptop screen protectors have a much longer cutting path, and during long-distance cutting, the material may experience slight deviation due to blade pressure. This can cause inacc...
MTB-CUT 180T
If the cutting model is in the wrong direction (e.g., mirrored, upside down, or rotated incorrectly), you can adjust it using the mirror and rotation functions:
Use X/Y Axis Mirro...
MTB-CUT 180T
We not only provide the screen protector cutting machines, but also offer various types of cutting materials with different functions and sizes.
You can purchase the cutting films...
MTB-CUT 180T
Unlike laser cutting machines, our screen protector cutting machine uses physical cutting, which is safe, noise-free, and pollution-free.
MTB-CUT 180T
In most cases, you can keep the cutting speed at the default value of 200.
This setting works well for the majority of materials.
When to reduce the speed
You should lower the...
MTB-CUT 180T
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material.
The thicker the material, the higher the blade holder scale...
MTB-CUT 180T
This issue is usually caused by a loose carriage, resulting in unstable cutting paths and improper round cutting.
Please follow these steps:
Refer to the instruction video and re...
MTB-CUT 180T
"The recommended cutting parameters for UV materials on the screen protector cutting machine are:
Blade holder scale: 6, Cutting pressure: 380.
If the machine cannot cut properl...
MTB-CUT 180T
"The cutting machine may work slowly if the cutting speed setting is too low.
Please try setting the cutting speed to the default value of 200 and then attempt cutting again.
If...
MTB-CUT 180T
This issue is usually caused by the rollers not gripping the material properly, allowing it to shift during cutting.
Please check the following:
Ensure all rollers are positioned...
MTB-CUT 180T
"The recommended cutting parameters for back films are:
Material Size: 180mm width × 120mm height
Pressure: 300
Blade Holder Scale: 5
Speed: 200
These settings are suit...
Showing 21
to 40
of 242 results
