Showing 28 results
for
"restart"
MTB-CUT M188
If your MTB-CUT M188 displays “Time Out” after powering on, it is usually caused by an abnormal serial communication between the screen and the mainboard.
This situati...
MTB-CUT 180T
This is a network issue, meaning the current network’s DNS cannot resolve the server address.
Please try the following steps:
Switch to a different network
Connect the mac...
MTB-CUT 180T
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT 180T
If the machine stops working after performing an update, it is usually caused by incomplete data download during the update process.
You can try the following steps:
Clear the...
MTB-CUT M288
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT 180T
If the machine displays a “Time Out” error during film cutting, please follow the steps below:
1. Check whether the motherboard is connected
On the machine, go to:...
MTB-CUT 180T
If the machine is not showing phone models, this is usually caused by an incorrect language setting or an incomplete language/data package, which prevents the system from loading t...
MTB-CUT 180T
If the device shows an error such as “Failed to query the hardware version”, please try the following steps:
1.Restart the machine and check if the message disappears....
Showing 21
to 28
of 28 results
