Showing 54 results
for
"full back films"
MTB-CUT 180T
"The intelligent film cutting machine is easy to set up.
The standard settings include cutting pressure, cutting speed, blade holder scale, and material size.
Material size mainl...
MTB-CUT 180T
"Here are some default setting ：material size is 180mm width × 120mm height.
Cutting pressure: 300
Cutting speed: 200
Blade holder scale: 5
These default settings are sui...
MTB-CUT 180T
"The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device"".
https://osscdn.mietubl.com/images/202505191638...
MTB-CUT 180T
"If the tablet screen protector is not cutting well, it is usually because the roller is not providing enough pressure. You can try the following solutions:
Lift the gear at the ba...
MTB-CUT 180T
If you want to improve cutting results, please follow these tips:
Check Wheel Position
Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
MTB-CUT 180T
"This video demonstrates how to restore the machine to its factory settings.
Performing a factory reset will return the device to its original working state.
Please note: Any app...
MTB-CUT 180T
"If the machine remains stuck on the logo screen after powering on and cannot proceed to the next operation, reinstalling the system may resolve the issue.
This video provides a st...
MTB-CUT M288
"The top cover of the M288 machine is secured with pins.
If the top cover comes off, you can follow the method shown in the video to properly lock the top cover back in place." htt...
MTB-CUT M188
"The top cover of the M288 machine is secured with pins.
If the top cover comes off, you can follow the method shown in the video to properly lock the top cover back in place." htt...
MTB-CUT 180T
Laptop screen protectors have a much longer cutting path, and during long-distance cutting, the material may experience slight deviation due to blade pressure. This can cause inacc...
MTB-CUT 180T
This happens because the APP version was rolled back during the factory reset.
When the machine is reset, the system returns to the earliest APP version, and many new models added...
MTB-CUT 180T
When you first receive the machine, you must remove the transport-locking screw located on the back of the device to prevent damage to the blade carriage.
During normal daily us...
MTB-CUT 180T
To adjust the roller position, press down the handle at the back of the machine, then move the rollers left or right to the correct position.
Important reminders:
After adjustm...
MTB-CUT 180T
The screen protector machine’s app updates are one-way.
This means:
➡️ Once the app is updated to a higher version, it cannot be rolled back to a lower version.
Rollback o...
Showing 41
to 54
of 54 results
