Showing 78 results
for
"material handling"
MTB-CUT 180T
"This issue can be caused by several reasons:
Low Cutting Pressure
Check your cutting pressure settings.
If the pressure is too low, the blade holder won’t drop enough to tou...
MTB-CUT M288
The screen protector machine will automatically find the middle cutting position according to the material size setting. Adjust the material size setting to change the cutting rang...
MTB-CUT M188
The screen protector machine will automatically find the middle cutting position according to the material size setting. If you need to change the cutting range, adjust the materia...
MTB-CUT M188
"The roller in the MTB-CUT M188 screen protector cutting machine is primarily responsible for controlling the forward and backward movement of the cutting material.
If the cutting...
MTB-CUT 180T
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material.
Thicker or harder materials require a higher blade size, while thi...
MTB-CUT 180T
To adjust the roller position, press down the handle at the back of the machine, then move the rollers left or right to the correct position.
Important reminders:
After adjustm...
MTB-CUT 180T
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films.
Recommended Solution
When cutting full back film, pl...
MTB-CUT 180T
The intelligent film cutting machine uses hydrogel screen protectors, typically made of TPU/PET material. These can include high-definition, privacy, explosion-proof, matte, and an...
MTB-CUT 180T
"If the sensor is not working, please check whether it has been disabled in the settings.
Go to Settings, find the option “Material Auto-feeding”, and make sure it is turned ON....
MTB-CUT 180T
This issue is usually caused by incorrect roller positioning, resulting in uneven pressure on the material and inconsistent cutting sizes.
To adjust the roller position, press dow...
MTB-CUT 180T
"The default parameters of the screen protector cutting machine — blade holder scale 5 and cutting pressure 300g — are suitable for most materials, including HD clear film.
If the...
MTB-CUT 180T
"The recommended cutting parameters for UV materials on the screen protector cutting machine are:
Blade holder scale: 6, Cutting pressure: 380.
If the machine cannot cut properl...
MTB-CUT 180T
This issue is usually caused by the rollers not gripping the material properly, allowing it to shift during cutting.
Please check the following:
Ensure all rollers are positioned...
MTB-CUT 180T
This issue is usually caused by incorrect roller positioning, resulting in uneven pressure on the material and inconsistent cutting sizes.
To adjust the roller position, press dow...
MTB-CUT 180T
It is generally recommended to replace the blade after around 300 cuts.
The actual replacement frequency may vary depending on material type and usage. If cutting quality...
MTB-CUT 180T
"The privacy angle setting is mainly used for HD privacy cutting materials. Since screen structures and display effects vary across devices, there is no universal angle setting.
Yo...
MTB-CUT 180T
If you encounter problems while configuring the machine, you can try using the following default settings, which work for most materials:
Recommended Default Settings
Speed: 20...
MTB-CUT 180T
Using the machine is very simple.
After completing the account registration, you only need to:
Select the required phone model/template on the machine
Place the cutting materi...
MTB-CUT 180T
"When the film bulges during cutting, it is usually caused by the following reasons:
Blade holder depth set too high – Excessive cutting depth can cause uneven stress on the materi...
MTB-CUT 180T
Under normal conditions, we recommend replacing the blade after approximately: 300 cuts
However, this is only a recommended value.
The actual blade lifespan may increase or decre...
Showing 41
to 60
of 78 results
