Showing 128 results
for
"service life"
MTB-CUT 180T
"The rubber cutting mat strip located beneath the blade serves to prevent blade wear and extend the blade’s service life.
However, after prolonged use, the surface of the mat strip...
MTB-CUT 180T
Under normal conditions, we recommend replacing the blade after approximately: 300 cuts
However, this is only a recommended value.
The actual blade lifespan may increase or decre...
MTB-CUT 180T
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT M688/M288
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT M188
If your MTB-CUT M188 displays a “Time Out” or “Reconnection” error after startup, please follow the steps below:
Step 1: Check the machine barcode
Check t...
MTB-CUT 180T
If you encounter problems while configuring the machine, you can try using the following default settings, which work for most materials:
Recommended Default Settings
Speed: 20...
MTB-CUT 180T
If you receive a “Dealer ID issue” error,please click the WhatsApp button below and send the following two screens to our technical support team:
The error message scr...
MTB-CUT 180T
If you are using standard back film, please follow these steps:
Set the material size in settings according to your actual material (e.g., 180 × 120 mm)
Enable the &ldquo...
MTB-CUT 180T
If you are using standard back film, please follow these steps:
Set the material size in settings according to your actual material (e.g., 180 × 120 mm)
Enable the &ldquo...
MTB-CUT 180T
Currently, our distributors in India also act as service centers. If you encounter any issues with your machine, please contact the distributor who sold you the machine directly. F...
MTB-CUT 180T
If you are using standard back film, please follow these steps:
Set the material size in settings according to your actual material (e.g., 180 × 120 mm)
Enable the &ldquo...
MTB-CUT 180T Pro
Please scan the QR code below to download the mobile app.
Currently, the MTB-CUT 180T Pro only supports an Android APP.
After installing the APP, tap the top-right corner on...
MTB-CUT 180T Pro
Please scan the QR code below to download the mobile app.
Currently, the MTB-CUT 180T Pro only supports an Android APP.
After installing the APP, tap the top-right corner on...
MTB-CUT 180T
If you discover a size cutting problem during cutting, please send us the following information:
The phone’s System Information page
The corresponding cutting template/mode...
MTB-CUT 180T Pro
Please scan the QR code below to download the mobile app.
Currently, the MTB-CUT 180T Pro only supports an Android APP.
After installing the APP, tap the top-right corner on...
MTB-CUT 180T
Please click "My" → "Version Update" → "Update". If a new app version is available, your device will update automatically. If no update is available, then you are already...
MTB-CUT 180T
The print quality of customized photos is not related to the screen protector cutting machine. It mainly depends on the printer and its printing performance.
If you requir...
MTB-CUT M188
If your MTB-CUT M188 displays “Time Out” after powering on, it is usually caused by an abnormal serial communication between the screen and the mainboard.
This situati...
MTB-CUT 180T
If the cutting model is in the wrong direction (e.g., mirrored, upside down, or rotated incorrectly), you can adjust it using the mirror and rotation functions:
Use X/Y Axis Mirro...
MTB-CUT 180T
This issue usually occurs after replacing the machine’s mainboard.
Because the machine ID is originally bound to the old mainboard, installing a new mainboard requires the I...
Showing 1
to 20
of 128 results
